Abstract:The article presents the hardware and software configuration of the developed multi-channel temperature measurement system as well as calibration procedures and measurement results verifying the properties of measurement channels. The system has been developed and dedicated primarily for measuring the temperature distribution in a laboratory model simulating underground power lines. With the adopted configuration of the analog part of each measurement channel, the main functions in the system developed as a virtual instrument are performed in its software. The instrument input circuits contain NTC (negative temperature coefficient) thermistors used as temperature sensors. The resistance of each of the thermistors connected in the voltage divider circuits is converted into a voltage. The obtained voltages in the measurement channels, after analog-to-digital conversion (ADC), are processed in subsequent operations in the instrument's software. In addition to the basic function of the device, which is the multi-channel temperature measurement, the operations of identifying the characteristics of the thermistors used and calibrating each of the individual measurement channels are performed. The article contains sample results of the calibration of measurement channels and temperature verification measurements used to evaluate the properties of the developed system. The obtained inaccuracy of the temperature measurement in each of the channels is less than 0.4 °C.

Demarcation and Uncertainty of Multichannel Temperature Measurement System Based on Max1402

System of Numeral Temperature Testing Based on ARM and DS18B20

An Inaccuracy of +/- 0.5 degrees C Digital Temperature Sensor From-40 degrees C to 125 degrees C With Curvature Correction

Study on the temperature control system design based on the MCU

Design of a Multichannel Dynamic Temperature Measurement System for Developing Thermal Management System of New Energy Vehicles

Design and Realization of Temperature Limiter Measurement and Control System

Design of High Precision and Multiple Channel Temperature Measuring System Based on SPCE061A

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

High precision temperature measurement system based on multichannel current acquisition

Design of Calibration System for Multi-Channel Thermostatic Metal Bath

An Automatic Test System for a Spaceborne Chip of a Temperature-Sensing Controller

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

Multi-channel Temperature Monitoring System Based on MCU

A Design of the Temperature Test System Based on Grouping DS18B20

Development of Temperature Collecting System Based on A/D Converter MAX1415

Multi-Channel Virtual Instrument for Measuring Temperature—A Case Study

A design of digital temperature measurement based on platinum resistance

Uncertainty in the Temperature Measurement System Using Thermocouples

Temperature Measurement And Alarm System Based On SCM AT89S52

FPGA-based multi-channel thermocouple temperature measurement system

Design of a Negative Temperature Coefficient Temperature Measurement System Based on a Resistance Ratio Model