Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

The morphology and conductivity of PEDOT films under chemical synthesis

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

A scalable route to prepare core–shell structured ZnO@PEDOT nanowires and PEDOT nanotubes and their properties as electrode materials

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

Progress in Synthesis of Conductive Polymer Poly(3,4-Ethylenedioxythiophene)

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology

The effect of ethylene glycol post-treatment on the electrical conductivity of PEDOT: PSS thin films

Nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite film for the electrode applications in organic thin-film transistor and dye-sensitized solar cells

Temperature‐triggered oxidative polymerization for high conductive poly(3,4‐ethylenedioxythiophene) sheets at millimeter scale

Electrochemical And Optical Properties Of The Poly(3,4-Ethylenedioxythiophene) Film Electropolymerized In An Aqueous Sodium Dodecyl Sulfate And Lithium Tetrafluoroborate Medium

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

Ab initio modeling and experimental analysis of electronic conductivity in PEDOT:PSS-PEO films for extrusion-based manufacturing

The Thermoelectric Properties of Spongy PEDOT Films and 3D-Nanonetworks by Electropolymerization

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

Functional conductive nanomaterials via polymerisation in nano-channels: PEDOT in a MOF

Recent Advances of Synthesis, Properties, Film Fabrication Methods, Modifications of Poly(3,4‐ethylenedioxythiophene), and Applications in Solution‐Processed Photovoltaics

Thermoelectric PEDOT:PSS Sheet/SWCNTs composites films with layered structure

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Interplay Between Doping, Morphology, and Lattice Thermal Conductivity in PEDOT:PSS

Preparation of a porous conducting polymer film by electrochemical synthesis-solvent extraction method

Characterization and Electrical Properties of Conductive Polymer/colloidal Graphite Oxide Nanocomposites