Abstract:This study focuses on the nanostructure engineering of PEDOT thin films, fabricated via the oxidative chemical vapor deposition (oCVD) method with antimony pentachloride (SbCl5) as the oxidant. By controlling deposition temperature and π–π stacking distance, significant improvements in carrier mobility (23.58 ± 1.71 cm2 V−1s−1) and thermoelectric power factor (112.57 ± 4.33 μW m−1 K−2) are achieved, demonstrating the correlation between nanostructure and enhanced thermoelectric performance. Air‐stable, lightweight, and electrically conductive conjugated polymers have attracted significant attention for thermoelectric applications, especially in low‐temperature environments. However, their low carrier mobility has limited broader adoption. This study addresses this challenge by investigating the nanostructure of poly(3,4‐ethylenedioxythiophene) (PEDOT) thin films fabricated via oxidative chemical vapor deposition (oCVD) at various deposition temperatures. Through systematic control of the semi‐crystalline orientation and π–π stacking distance, a substantial enhancement in carrier mobility (23.58 ± 1.71 cm2 V−1 s−1) and electrical conductivity (6345 ± 210 S cm−1) is achieved. The thermoelectric power factor demonstrates a direct correlation with deposition temperature, achieving a maximum value of 112.57 ± 4.33 μW m−1 K−2. PEDOT thin films fabricated at higher deposition temperatures show minimal reductions in electrical conductivity as absolute temperature decreased, reflecting a lower resistivity ratio and extended metallic state, as indicated by the metal–insulator transition in the Zabrodskii plot. Incorporating the Seebeck coefficient into the parabolic energy band diagram revealed strong agreement between theoretical and experimental carrier mobility, while also indicating that the energy barrier for intercrystalline charge transport decreases as deposition temperature increases. The highly face‐on orientation and reduced π–π stacking distance in PEDOT thin films facilitate quasi‐1D conduction, thereby enhancing carrier mobility.

Interplay Between Doping, Morphology, and Lattice Thermal Conductivity in PEDOT:PSS

Unravelling Doping Effects on Pedot at the Molecular Level: from Geometry to Thermoelectric Transport Properties

Anisotropic Lattice Thermal Conductivity in Highly Ordered PEDOT Fibers

Rationalization of Microstructure Modulation and Doping on the Enhancement Mechanism of Thermoelectric Properties of PEDOT:PSS

Boosting the Seebeck Coefficient for Organic Coordination Polymers: Role of Doping-Induced Polaron Band Formation.

Morphology and ion diffusion in PEDOT:Tos. A coarse grained molecular dynamics simulation.

Widely variable Seebeck coefficient and enhanced thermoelectric power of PEDOT:PSS films by blending thermal decomposable ammonium formate

Constructing Ordered-Structure Organic Thermoelectric Films via Supramolecular Self-Assembly of PEDOT:PSS and Conjugated Triblock Copolymer

Hybrid Thermal Transport Characteristics of Doped Organic Semiconductor Poly(3,4-ethylenedioxythiophene):Tosylate

Coupling Electronic and Phonon Thermal Transport in Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Nanofibers

Study of thermoelectric properties in the PEDOT:PSS/Te double-layer thin film devices

Thermoelectric PEDOT:PSS Sheet/SWCNTs composites films with layered structure

Investigations of Morphology and Carrier Transport Characteristics in High‐Performance PEDOT:PSS/Tellurium Binary Composite Fibers Produced via Continuous Wet‐Spinning

Improved Alignment of PEDOT:PSS Induced by in-situ Crystallization of "Green" Dimethylsulfone Molecules to Enhance the Polymer Thermoelectric Performance

Improved Thermoelectric Performance of Free-Standing PEDOT:PSS/Bi2Te3 Films with Low Thermal Conductivity

Great Enhancement in the Seebeck Coefficient and Thermoelectric Properties of Solid PEDOT:PSS Films Through Molecular Energy Filtering by Zwitterions

Crystalline Domain Formation to Enable High-Performance Polymer Thermoelectrics Inspired by Thermocleavable Materials

Enhanced Carrier Mobility and Thermoelectric Performance by Nanostructure Engineering of PEDOT Thin Films Fabricated via the OCVD Method Using SbCl5 Oxidant

Giant Seebeck Effect in PEDOT Materials with Molecular Strain

Great Enhancement in the Seebeck Coefficient of PEDOT:PSS by Polaron Level Splitting via π–π Overlapping with Nonpolar Small Aromatic Molecules

Correlation of morphology and charge transport in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films