Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Temperature‐triggered oxidative polymerization for high conductive poly(3,4‐ethylenedioxythiophene) sheets at millimeter scale

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Sequential Solution Polymerization of Poly(3,4-ethylenedioxythiophene) Using V2O5 As Oxidant for Flexible Touch Sensors

Thickness Dependent Thermal Performance of a Poly(3,4-Ethylenedioxythiophene) Thin Film Synthesized Via an Electrochemical Approach

Thermal Conductivity and Elastic Constants of PEDOT:PSS with High Electrical Conductivity

Transferrable, Large‐area and Highly Conductive PEDOT : PSS Film and Its Application for Flexible Thermoelectric Generators

Progress in Synthesis of Conductive Polymer Poly(3,4-Ethylenedioxythiophene)

Ultrafast Laser‐Induced Excellent Thermoelectric Performance of PEDOT:PSS Films

Enzymatic‐catalyzed polymerization of water‐soluble electrically conductive polymer PEDOT:PSS

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Facile Approach to Enhance Electrical and Thermal Performance of Conducting Polymer PEDOT:PSS Films Via Hot Pressing.

A Two-Stage Enzymatic Synthesis of Conductive Poly(3,4-Ethylenedioxythiophene)

Solid-State Synthesis of a Conducting Polythiophene Via an Unprecedented Heterocyclic Coupling Reaction

Preparation of Conducting Poly(3,4-ethylenedioxythiophene) and Investigation on Its Properties

Preparation of multifunctional composite materials based on PEDOT via enzymatic cascade polymerization

Progress on fabrication of poly(3,4-ethylenedioxythiophene) film

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology

Solution processed intrinsically conductive polymer films with high thermoelectric properties and good air stability

One-step Fabrication of Conductive Poly(3,4-Ethylenedioxythiophene) Hollow Spheres in the Presence of Poly(vinylpyrrolidone)

Preparation of PEDOT Film by Liquid Phase Depositional Polymerization

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced conductivity and transparency for semitransparent perovskite solar cells