Abstract:Poly(3,4-ethylenedioxythiophene):poly(sodium styrenesulfonate) (PEDOT:PSS) is widely used in many aspects due to its good electrical conductivity. However, the low solid content of the PEDOT:PSS aqueous dispersion hinders its further application. Aiming to address this problem, a kind of novel "long-armed" crosslinked microspheres (cPBA@PSS), with crosslinked poly(butyl acrylate) as the core and poly(sodium styrenesulfonate) as the "long arm", is synthesized via reversible addition-fragmentation chain transfer (RAFT) soap-free emulsion polymerization. With the "long-armed" crosslinked microspheres as the template, poly(3,4-ethylenedioxythiophene):poly(butyl acrylate-co-sodium styrenesulfonate) (PEDOT:cPBA@PSS) with a high solid content and low viscosity is successfully fabricated. The structures of cPBA@PSS are confirmed by infrared spectroscopy and hydrogen nuclear magnetic resonance spectroscopy. A PEDOT:cPBA@PSS aqueous dispersion with a solid content as high as 25 wt % is obtained by using long-armed crosslinked microspheres as the template due to the reduction of the entanglement between macromolecules. The kinetic study shows that the solid content of the dispersion has little effect on the polymerization rate of 3,4-ethylenedioxythiophene (EDOT). However, the viscosity of PEDOT:cPBA@PSS aqueous dispersions increases with an increase in the solid content. A PEDOT:cPBA@PSS aqueous dispersion with a solid content of up to 25 wt % shows a viscosity of about 37 mPas. The effect of the solid content on the transparency of PEDOT:cPBA@PSS films is studied, and no significant impact on film transparency is observed. The transmittance of the films at 550 nm is over 80%. The conductivity of the PEDOT:cPBA@PSS film increases with an increase in the solid content of the dispersion. The PEDOT:cPBA@PSS aqueous dispersion with a solid content of 25 wt % shows a conductivity of 0.68 S/cm when the ratio of PEDOT to cPBA@PSS is 1:1. The conductivity of the PEDOT:cPBA@PSS film can also be enhanced by secondary doping of dimethyl sulfoxide (DMSO), and the conductivity of the PEDOT:cPBA@PSS film can be increased to about 3.82 S/cm. This study shows that the use of the long-armed crosslinked microsphere cPBA@PSS as a template is an effective method to fabricate PEDOT aqueous dispersions with a high solid content and low viscosity.

One-step Fabrication of Conductive Poly(3,4-Ethylenedioxythiophene) Hollow Spheres in the Presence of Poly(vinylpyrrolidone)

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Enzymatic‐catalyzed polymerization of water‐soluble electrically conductive polymer PEDOT:PSS

Synthesis and Performances of Poly(3,4-ethylenedioxythiophene) Aqueous Dispersions with a High Solid Content and Low Viscosity

Ionic Liquid Induced Supramolecular Self-Assembly of Poly(3,4-Ethylenedioxythiophene)/poly(4-styrenesulfonate) Thin Films with Enhanced Conductivity and Tunable Nanoporosity

Preparation of Conducting Poly(3,4-ethylenedioxythiophene) and Investigation on Its Properties

Preparation and characterization of conducting poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) Langmuir–Blodgett film

Self-assembly of Highly Conductive Self-N-doped Fullerene Ammonium Halides and Their Application in Thein Situsolution-Processable Fabrication of Working Electrodes for Alcohol Electrooxidation

Preparation of Water-Dispersive Poly(3,4-Ethylenedioxythiophene) (PEDOT) Conductive Nanoparticles in Lignosulfonic Acid Solution

Electropolymerization of EDOT in an anionic surfactant-stabilized hydrophobic ionic liquid-based microemulsion.

Temperature‐triggered oxidative polymerization for high conductive poly(3,4‐ethylenedioxythiophene) sheets at millimeter scale

A Two-Stage Enzymatic Synthesis of Conductive Poly(3,4-Ethylenedioxythiophene)

Vesicle-templating poly (3,4-ethylenedioxythiophene) hollow microspheres with enhanced electrocatalytic activity toward ascorbic acid oxidation

Preparation and Properties of Conducting Polymer Poly(3,4-ethylenedioxythiophene) Nanoparticles

Poly(3,4‐ethylenedioxythiophene) Nanospheres Synthesized Using a Micelle Soft Template Associated with Cuprous Oxide

Synthesis of Water-Free PEDOT with Polyvinylpyrrolidone Stabilizer in Organic Dispersant System

Preparation of PEDOT Film by Liquid Phase Depositional Polymerization

Progress in Synthesis of Conductive Polymer Poly(3,4-Ethylenedioxythiophene)

One-pot self-assembly preparation of thiol-functionalized poly(3,4-ethylenedioxythiophene) hollow nanosphere/Au composites, and their electrocatalytic properties

Self-assembly Synthesis of Hollow, Core–shell and Solid Soluble Oligo(3,4-Ethylenedioxythiophene)s Microspheres in a Mixed Solvent

Polymer in Situ Embedding for Highly Flexible, Stretchable and Water Stable PEDOT:PSS Composite Conductors