Abstract:Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a promising material because of its favorable electrical and mechanical properties, stability in ambient environments, and biocompatibility. It finds broad application in energy storage, flexible electronics, and bioelectronics. Additive manufacturing opens a plethora of new avenues to form and shape PEDOT:PSS, allowing for the rapid construction of customized geometries. However, there are difficulties in printing PEDOT:PSS while maintaining its attractive properties. A 3D printing method for PEDOT:PSS using a room‐temperature coagulation bath‐based direct ink writing technique is reported. This technique enables fabrication of PEDOT:PSS into parts that are of high resolution and high conductivity, while maintaining stable electrochemical properties. The coagulation bath can be further modified to improve the mechanical properties of the resultant printed part via a one‐step reaction. Furthermore, it is demonstrated that a simple post‐processing step allows the printed electrodes to strongly adhere to several substrates under aqueous conditions, broadening their use in bioelectronics. Employing 3D printing of PEDOT:PSS, a cortex‐wide neural interface is fabricated, and intracranial electrical stimulation and simultaneous optical monitoring of mice brain activity with wide field calcium imaging are demonstrated. This reported 3D‐printing technique eliminates the need for cumbersome experimental setups while offering desired material properties. Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has received increasing attention in the research community due to favorable properties for developing bioelectronic devices. This work reports a simple 3D printing method (direct ink writing) to directly pattern PEDOT:PSS into desired structures. The printed parts have excellent mechanical and electrochemical properties, which allows for the fabrication of a precise cortex‐wide neural interface for brain stimulation.

Omnidirectional Printing of PEDOT:PSS for High-Conductivity Spanning Structures

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Imparting High Conductivity to 3D Printed PEDOT:PSS

Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations

DLP 3D Printing of Electrically Conductive Hybrid Hydrogels Via Polymerization-Induced Phase Separation and Subsequent in Situ Assembly of Polypyrrole

3D printing of conducting polymers

Coagulation Bath‐Assisted 3D Printing of PEDOT:PSS with High Resolution and Strong Substrate Adhesion for Bioelectronic Devices

Electrohydrodynamic Printing of Microscale PEDOT:PSS-PEO Features with Tunable Conductive/Thermal Properties.

Highly Conductive Inkjet-Printed PEDOT:PSS Film under Cyclic Stretching

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors

Unraveling the Order and Disorder in Poly(3,4-ethylenedioxythiophene)/Poly(styrenesulfonate) Nanofilms

Semiconductive Polymer-Doped PEDOT with High Work Function, Conductivity, Reversible Dispersion, and Application in Organic Solar Cells

Ultrahigh-Conductivity Polymer Hydrogels with Arbitrary Structures.

Ionic Liquid Induced Supramolecular Self-Assembly of Poly(3,4-Ethylenedioxythiophene)/poly(4-styrenesulfonate) Thin Films with Enhanced Conductivity and Tunable Nanoporosity

Design of Highly Conductive, Intrinsically Stretchable, and 3D Printable PEDOT:PSS Hydrogels via PSS-Chain Engineering for Bioelectronics

Direct Laser Writing of Nanoscale Undoped Conductive Polymer

All-Polymer Conducting Fibers and 3D Prints via Melt Processing and Templated Polymerization

Integrated Ionic‐Additive Assisted Wet‐Spinning of Highly Conductive and Stretchable PEDOT:PSS Fiber for Fibrous Organic Electrochemical Transistors

Enhancing the Electrical Conductivity and Long-Term Stability of PEDOT:PSS Electrodes through Sequential Treatment with Nitric Acid and Cesium Chloride

One-step Fabrication of Conductive Poly(3,4-Ethylenedioxythiophene) Hollow Spheres in the Presence of Poly(vinylpyrrolidone)

Direct electron beam patterning of electro-optically active PEDOT:PSS