Abstract:Fabrication techniques such as laser patterning offer excellent potential for low cost and large area device fabrication. Conductive polymers can be used to replace expensive metallic inks such as silver and gold nanoparticles for printing technology. Electrical conductivity of the polymers can be improved by blending with carbon nanotubes. In this work, formulations of acid functionalised multiwall carbon nanotubes (f-MWCNT) and poly (ethylenedioxythiophene) [PEDOT]: polystyrene sulphonate [PSS] were processed, and thin films were prepared on plastic substrates. Conductivity of PEDOT: PSS increased almost four orders of magnitude after adding f-MWCNT. Work function of PEDOT:PSS/f-MWCNT films was ~ 0.5eV higher as compared to the work function of pure PEDOT:PSS films, determined by Kelvin probe method. Field-effect transistors source-drain electrodes were prepared on PET plastic substrates where PEDOT:PSS/f-MWCNT were patterned using laser ablation at 44mJ/pulse energy to define 36 micron electrode separation. Silicon nanowires were deposited using dielectrophoresis alignment technique to bridge the PEDOT:PSS/f-MWCNT laser patterned electrodes. Finally, top-gated nanowire field effect transistors were completed by depositing parylene C as polymer gate dielectric and gold as the top-gate electrode. Transistor characteristics showed p-type conduction with excellent gate electrode coupling, with an ON/OFF ratio of ~ 200. Thereby, we demonstrate the feasibility of using high workfunction, printable PEDOT:PSS/MWCNT composite inks for patterning source/drain electrodes for nanowire transistors on flexible substrates.

Direct Laser Writing of Nanoscale Undoped Conductive Polymer

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Peripheral-photoinhibition-based Direct Laser Writing with Isotropic 30 Nm Feature Size Using a Pseudo 3D Hollow Focus

Direct electron beam patterning of electro-optically active PEDOT:PSS

Laser patterned polymer/nanotube composite electrodes for nanowire transistors on flexible substrates

Self-Assembly Of Conducting Polymer Nanowires As Hole Injection Layer For Organic Light-Emitting Diodes Applications

Chemical Vapor Phase Polymerization Deposition of Layer-Ordered Conducting Polymer Nanostructure for Hole Injection Layer

Direct Writing of Aligned Conjugated Polymer Micro-Ribbons for High-Performance Organic Electronics

Highly Crystalline PEDOT Nanofiber Templated by Highly Crystalline Nanocellulose

Micro‐interfacial Polymerization of Porous PEDOT for Printable Electronic Devices

High-Speed Photothermal Patterning of Doped Polymer Films.

Directly Patterning Conductive Polymer Electrodes on Organic Semiconductor via In Situ Polymerization in Microchannels for High-Performance Organic Transistors

Characterization of PEDOT:PSS Nanofilms Printed via Electrically Assisted Direct Ink Deposition with Ultrasonic Vibrations

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology

Stepwise Aggregation Control of PEDOT:PSS Enabled High-Conductivity, High-Resolution Printing of Polymer Electrodes for Transparent Organic Phototransistors

Preparation of Water-Dispersive Poly(3,4-Ethylenedioxythiophene) (PEDOT) Conductive Nanoparticles in Lignosulfonic Acid Solution

A Cost-Effective Strategy to Modify the Electrical Properties of PEDOT:PSS via Femtosecond Laser Irradiation

Dip-Pen Nanopatterning of Photosensitive Conducting Polymer Using A Monomer Ink

Thermodynamic Mechanism Governing the Coalescence of Conductive Particles in PEDOT:PSS under Laser Irradiation

A General Synthesis Method for Patterning PEDOT Toward Wearable Electronics and Bioelectronics

Progress in Synthesis of Conductive Polymer Poly(3,4-Ethylenedioxythiophene)