Abstract:Corrosion defect on pipelines shows a time-dependent growth in service environments. Prediction of corrosion defect growth and failure pressure of corroded pipelines as a function of time has remained a big challenge to industry. In this work, a finite element (FE)-based model was developed to quantify 3-dimensional (3-D) growth of a corrosion defect on an X100 steel pipe and predict the failure pressure as a function of time by considering a mechano-electrochemical (M-E) interaction. Parametric effects, including internal pressure, axial tensile stress and initial defect length, were investigated. Distributions of von Mises stress and anodic current density (i.e., corrosion rate) at the corrosion defect were determined. Results demonstrated that the growth rate of the corrosion defect followed the order of defect depth > defect length > defect width. With increased stresses resulted from internal pressure and axial tensile loading, the maximum defect depth and defect length increased apparently, but the defect width changed slightly. For example, the defect length increased by 11% and 16% after 10 years of service at internal pressures of 18 MPa and 26 MPa, respectively, and the defect depth increased by 27% and 34% correspondingly. However, the corrosion width increase maintained at about 22% when the internal pressure increased from 18 MPa to 26 MPa. As the corrosion defect grew with time, the failure pressure of the pipeline decreased. It is expected that, upon further validation by substantial data from field and the laboratory, the developed model could contribute to improved pipeline integrity management.

A NOVEL MODEL FOR PREDICTING FLOW ACCELERATED CORROSION RATE IN REDUCER

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A novel method to determine the flow accelerated corrosion rate in the elbow

A Novel Method to Determine Flow‐accelerated Corrosion Rate Based on Fluid Structure Interaction

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Numerically Investigating the Influence of Local Flow Behaviors on Flow-Accelerated Corrosion Using Two-Fluid Equations

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

A Statistical Model for Accessing Wall Thinning Rate Due to Flow Accelerated Corrosion Based on Inspection Data in Nuclear Power Plants

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

Erosion-corrosion Failure of REAC Pipes under Multiphase Flow

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Mechanical model and probability analysis of buried pipelines failure under uniform corrosion

A Two-Phase Methodology to Predict Fac Wear Sites in the Piping System of A Bwr

Predictions of Hydrodynamic Characteristics and Corrosion Rates Using CFD in the Piping Systems of Pressurized-Water Reactor Power Plant

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Corrosion Prediction Models for Steel Bars in Chloride-Contaminated Concrete: a Review

Development of a finite element model for simulation and prediction of mechanoelectrochemical effect of pipeline corrosion

Deflection and Crack Calculation of Corroded Reinforced Concrete Beams

Development of an empirical model to predict the burst pressure of corroded elbows of pipelines by finite element modelling