Abstract:High sound quality and low radiated noise are two dominant demands for the vibro-acoustic performance of internal combustion engines. Such engines with high acoustic quality will greatly improve the acoustic environment both inside and outside of the passenger compartment of an automobile. In this paper, this performance of the block of a four-cylinder diesel engine was simulated and bench-tested. Then the vibro-acoustic problems were diagnosed and optimized. The finite element analysis method was adopted to numerically analyze the natural modes of the block. The finite-element model of the block was verified by the experimental modal analysis utilizing the single-input and multiple-output technology. The results indicate that the modal frequency errors from the simulation and experiment are permissible in respect of engineering and the accuracy of the finite-element model highly matching the real one is validated. Then, the flexible multi-body dynamics model of the diesel engine was constructed and excited by the boundary conditions comprised of in-cylinder gas pressures, cylinder liner-piston contact induced lateral forces and valve system motion induced impact forces. The simulated vibration velocity levels from the block surface were obtained under the rated condition (75kW/3600rpm) and well verified by the bench test. Boundary element analysis method was employed to acquire the radiated acoustic pressures from the block surface in the frequency range of interest. Optimized schemes are implemented to the block surface in order to reduce the radiated noise and enhance the sound quality of the diesel engine. Finally, the optimal block was cast. And the bench-test results indicate that the sound quality of the new-block engine is substantially improved. The research achievements validate the feasibility and reliability of the optimal design for the block.

Experiment research on NVH performance of block-head assembly parts of engine

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

Study of NVH performance improvement for a four-cylinder diesel engine body

Sound quality improvement for a four-cylinder diesel engine by the block structure optimization

A Research on Improving the NVH Performance of Flywheel Cover

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Prediction method of radiated noise by engine block

Study on Thermoelastic Contact of Cylinder Head-Cylinder Head Gasket-Engine Block

Study on the Influence of Rubber Block Materials on NVH Performance of Vehicle Door

A study on optimization design of engine-room NVH for a modified vehicle

Analysis of Vibration and Radiated Noise Influenced by Reinforcing Plate in an In-Line 6-Cyilnder Engine

Prediction of Engine Block's Radiation Noise and Low-Noise Design

Dynamic simulation research on diesel engine's cranktrain and block

Research on Loudness of Radiation Noise of a Constrained-Layer Damping Oil Pan

Influence of the crankshaft torsional vibration to force of bearings and noise radiation of the engine

The Optimization Of Vibration Induced By A V6 Engine Cooling Module

Research on NVH Optimization Technique of Body-in-White Structures

Study on Noise Emission of Engine Block Based on Numerical Simulation

Integrated Virtual-Design Methods for Forecasting Radiated Noise of Single Cylinder Diesel Block