Abstract:The effect of cooling on the brittleness of glasses in general, and bulk metallic glasses (BMGs) in particular, is usually studied with continuously varying cooling rates; slower cooling rates lead to stiffer, harder, and more brittle glasses than higher cooling rates. These protocols obscure any potential discontinuity that a glass might experience depending on whether its microstructure resembles that of a fragile or a strong glass-forming liquid. Here, we use large-scale molecular dynamics to simulate the nanoindentation behavior of model BMGs (Zr$_{0.6}$Cu$_{0.3}$Al$_{0.1}$) obtained by rapidly quenching equilibrium melts from temperatures above and below the fragile-to-strong transition temperature $T_\textrm{fst}$, leading to fragile and strong glasses, respectively. While the contact modulus deduced from the indentation simulation evolves smoothly with the temperature $T_\text{q}$ from which the melt is quenched, the plastic response changes quasi-discontinuously as $T_\text{q}$ passes through $T_\textrm{fst}$. In particular, strong glasses develop highly asymmetric flow profiles with mature shear bands, in contrast to fragile glasses. Quantitative differences reveal themselves not only through a formal von Mises localization parameter analysis but also through image analysis of flow patterns using pre-trained artificial intelligence models. Moreover, seemingly erratic flow profiles for our indentation geometry produced surprisingly reproducible and, thus, deterministic features. It remains to be determined to what extent other classes of glass formers follow our observation that the degree of brittleness is significantly influenced by whether the melt is fragile or strong when it falls out of equilibrium at the glass transition temperature.

Microformability of bulk amorphous alloys in the supercooled liquid region

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region

Experimental Study on Formability of Bulk Metallic Glass As Mold for Microstructure Replication

Microforming Behavior of Zr-based Bulk Metallic Glass

Extrusion Properties of Bulk Amorphous Alloy Zr_(55)Al_(10)Ni_5Cu_(30)

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Plastic Deformation of a Mg-based Bulk Amorphous Alloy in Supercooled Liquid Region

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Bulk Mg-Cu-Y-Al Alloys in the Amorphous, Supercooled Liquid and Crystalline States

The Coupling Effect of Small Nanocrystals and Free Volume on the Ductility of Cu46Zr47Al7 Bulk Metallic Glass Alloy

Micro-back-extrusion of a bulk metallic glass

Elevating the Fracture Toughness of Cu49Hf42Al9 Bulk Metallic Glass: Effects of Cooling Rate and Frozen-in Excess Volume

Controlling the Mechanical Properties of Bulk Metallic Glasses by Superficial Dealloyed Layer

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites

Brittleness of metallic glasses dictated by their state at the fragile-to-strong transition temperature

Effects of Ag addition on crystallization, microstructure and mechanical properties of Zr-Cu-Ni-Al-Ag bulk metallic glasses

Homogeneity of the Superplastic Zr64.13Cu15.75Ni10.12Al10 Bulk Metallic Glass

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

Deformation and Crystallization of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 Bulk Metallic Glass in the Supercooled Liquid Region

Superplastic Formability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass