Abstract:The use of weld bonding (i.e., a combination of resistance spot welding and adhesive bonding) as a structural fastener is increasing in the automotive industry. However, a series of issues needs to be addressed such as the influence of adhesive characteristics (e.g., adhesive properties and bondline thickness) in the weld-bonding application to enhance the knowledge of this technology and reinforce its use. As part of the development and implementation of weld bonding, the present study was undertaken to experimentally evaluate the effects of the adhesive characteristics on the weld quality of weld-bonded multiple steel sheets. The weld quality in terms of the weld size, weld expulsion, and weld strength in weld bonding multiple stacks of steel sheets composed of 0.8-mm-thick SAE1004, 1.4-mm-thick DP600, and 1.8-mm-thick DP780 with different epoxy adhesives (i.e., A2 and A1) and bondline thicknesses (0.2 similar to 4.4 mm) are investigated in this study. It was found that while the viscosity of the adhesive significantly affects the static contact and dynamic resistances between the steel sheets, the uncured adhesive bondline thickness has little impact upon the contact and dynamic resistances. Consequently, the weld size and weld expulsion in weld-bonding multiple steel sheets increased with an increase in viscosity of the adhesive and exhibited little effect by the bondline thickness. The lap-shear strength of weld-bonded multiple steel sheets was increased significantly by the presence of the cured adhesive but was not affected by the applied, uncured adhesive bondline thickness. Finally, the placement of an adhesive between the thin external and thicker middle sheet to improve the weld size and penetration into the thin external sheet could be a feasible solution to resolve undersized welds in the resistance welding of multiple steel sheets. This study provides guidelines to the application of adhesive in weld bonding multiple stacks of steel sheets for vehicle manufacturing.

The Effect of Adhesive Properties on Laser Spot Weld Bonding

The influence of adhesive viscosity and elastic modulus on laser spot weld bonding process

Laser spot weld bonding of mild steel

Research on Laser Spot Weld-Bonding Process Characteristics

Influence of Adhesive Layer Properties on Laser-Generated Ultrasonic Waves in Thin Bonded Plates

Effect of adhesive characteristics on the weld quality in weld bonding multiple steel sheets

Adhesive placement in weld-bonding multiple stacks of steel sheets

A Study on the Role of Adhesives in Weld-Bonded Joints

Effect of adhesive on laser-arc hybrid welding of aluminum alloy to high-strength steel joint

Influence of Laser Process Parameters on the Characteristic of 30crmnsia Steel Substrate and Adhesively Bonded Joints

Effect of Nonwoven Carbon Tissue-Reinforced Epoxy Resin Adhesive Layer on the Single Lap Bonding Strength of Aluminum Alloy Joints

The Effect of Laser Remelting on the Microstructure and Mechanical Properties of the Bonding Interface in a Hybrid Metal Additive Manufacturing Process

Experimental and theoretical studies on laser treatment strategies for improving shear bonding strength of structural adhesive joints with cast aluminum

Characterizing the Properties of Adhesive in Bonded Materials by Laser Ultrasonic Method

Effects of Adhesive Property and Thickness on the Bond Performance Between Carbon Fiber Reinforced Polymer Laminate and Steel

Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite

Improving Adhesive Bonding of Al Alloy by Laser-Induced Micro–Nano Structures

Effects of elastic modulus and thickness of adhesives on the stress distribution in weld bonded joints

Studies on the Stress Distribution and Fatigue Behavior of Weld-Bonded Lap Shear Joints

Effect of laser pre-treatment on adhesive joint performance and evaluation of interfacial strain distribution using mechanoluminescence

Numerical studies on the stress distribution in weldbonded joints with different adhesives