Effect of adhesive characteristics on the weld quality in weld bonding multiple steel sheets

Yansong Zhang,J. Shen,Yong Zhao,Peichung Wang,Blair E. Carlson

IF: 2.2

2013-01-01

Welding Journal

Abstract:The use of weld bonding (i.e., a combination of resistance spot welding and adhesive bonding) as a structural fastener is increasing in the automotive industry. However, a series of issues needs to be addressed such as the influence of adhesive characteristics (e.g., adhesive properties and bondline thickness) in the weld-bonding application to enhance the knowledge of this technology and reinforce its use. As part of the development and implementation of weld bonding, the present study was undertaken to experimentally evaluate the effects of the adhesive characteristics on the weld quality of weld-bonded multiple steel sheets. The weld quality in terms of the weld size, weld expulsion, and weld strength in weld bonding multiple stacks of steel sheets composed of 0.8-mm-thick SAE1004, 1.4-mm-thick DP600, and 1.8-mm-thick DP780 with different epoxy adhesives (i.e., A2 and A1) and bondline thicknesses (0.2 similar to 4.4 mm) are investigated in this study. It was found that while the viscosity of the adhesive significantly affects the static contact and dynamic resistances between the steel sheets, the uncured adhesive bondline thickness has little impact upon the contact and dynamic resistances. Consequently, the weld size and weld expulsion in weld-bonding multiple steel sheets increased with an increase in viscosity of the adhesive and exhibited little effect by the bondline thickness. The lap-shear strength of weld-bonded multiple steel sheets was increased significantly by the presence of the cured adhesive but was not affected by the applied, uncured adhesive bondline thickness. Finally, the placement of an adhesive between the thin external and thicker middle sheet to improve the weld size and penetration into the thin external sheet could be a feasible solution to resolve undersized welds in the resistance welding of multiple steel sheets. This study provides guidelines to the application of adhesive in weld bonding multiple stacks of steel sheets for vehicle manufacturing.