Abstract:Micro-CT technique poses significant applications in characterizing the microstructure of materials. Based on the CT three-dimensional(3D) reconstruction technology and “Avizo” 3D visualization software, the microscopic pore-throat structure of porous media can be quantitatively characterized. This paper takes the carbon fiber reinforced resin matrix composites as an example to introduce the operation process of “Avizo” in details, which mainly covers the following modules: Volume Edit, Interactive Thresholding, Fill Holes, Mask, Separate Objects and Generate Pore Network Model, then further discuss the difficult problems when the “Avizo” is employed to analyze. The microstructures of carbon fiber reinforced resin matrix composites illustrate that pores in the upper part of sample are dramatically dispersed, and mainly concentrated in the lower part of sample. The porosity of adopted cuboid is 3.6%, accordingly the numbers of pores and throats reach 268 and 7, respectively. The equivalent radius of pores seems mainly distributed in the range of 0.7–0.8μm, accounting for 28.73% of the total pore number. The surface area of pore ranges from 5 to 10μm 2 , accounting for 14.16% of the total pore number. The pore volume concentrates in the range of 1–20μm 3 , accounting for 57.46% of the total pore number. In addition, the equivalent radius of throat mainly concentrates in the range of 1–5μm, the overall length of throat is distributed in the range of 37–60μm, and the equivalent area of throat is distributed non-uniformly in the range of 5–75μm 2 . This work provides a basis for the further investigation of fluid migration mechanism and law in the composite materials by the numerical simulation methodology.

Micro-CT characterization on porosity structure of 3D Cf/ SiCm composite

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Study on Microstructures of 2D and 3D Chemical Vapor Infiltration SiC/SiC Composites

Characterization of the Microstructure of Three‐Dimensional‐Needled Carbon/Silicon Carbide Composites

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Investigation on microstructure control of in-situ synthesized high-performance Cf/SiC composites

Effect of CVI-induced porosity on elastic properties and mechanical behaviour of 2.5D and 3D Cf/SiC composites with multilayered interphase

Study of Rapid Fabrication and Microstructure of C/C-SiC Composites

3D microstructure characterization of 2D Cf-ZrB2-SiC ultra-high temperature ceramic matrix composites using X-ray microscopy

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Microstructure and Mechanical Properties of Three Dimensional Cf/SiC-ZrC-ZrB2 Composites Prepared by Reactive Melt Infiltration Method

Microstructure and mechanical properties of C/C–SiC composites fabricated by a rapid processing method

Pore-throat structure characterization of carbon fiber reinforced resin matrix composites: Employing Micro-CT and Avizo technique

Influence of the Porosity of C/C on the Characterization of C/C-Sic Composites Prepared by Reactive Melt Infiltration Method

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Micro- and nano-structural investigations of C/C composites

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

PyC interphase growth mechanism and control models of C/SiC composites