Abstract:Temperature, as an important parameter in combustion diagnostic process, will directly affect the combustion efficiency and the generation of combustion products. The accurate measuring of combustion temperature and then controlling of combustion state can not only contribute to avoiding the generation of harmful waste gas, such as carbon monoxide (CO) and oxynitride (NOx), but also improve the combustion efficiency, thereby saving the energy. However, in practical applications, dynamic and high-temperature combustion field has strict requirements for measurement accuracy and response speed of the thermometry technology. As an advanced spectral thermometry technology, coherent anti-Stokes Raman scattering (CARS) has a much higher spatial resolution, and can achieve accurate temperature measurement in high-temperature environment, so CARS has the potential applications in complex combustion field. For the temperature measurement requirements in the complex dynamic and high-temperature combustion field, we demonstrate a hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering thermometry method through using the second harmonic bandwidth compression method, and achieve accurate measurements and dynamic response to temperature in dynamic and high-temperature combustion field. By using the narrow-band picosecond pulse obtained from the sum frequency process of femtosecond pulse in the BBO crystal as a probe pulse, this thermometry method can achieve single-shot, 1-kHz temperature measurement in high-temperature flame. We utilize the standard burner to simulate dynamic combustion field in a range of 1700–2200 K by changing the equivalence ratio quickly, and carry out continuous temperature measurement in 70 s by our thermometry method in this simulated dynamic and high-temperature flame. The least square method is used to fit the theoretical spectrum library to the actual single spectrum, and the fitting temperature corresponding to the actual single spectrum is obtained from the curve of fitting error. The continuous temperature measurements in 70 s exhibit superior performance in dynamic and high-temperature flame with a temperature inaccuracy less than 1.2% and a precision less than 1.8% at four different temperatures, and can track the temperature variation process within 0.2 s dynamically. These results verify the accuracy, stability and response speed in dynamic and high-temperature environment, and provide a new system scheme for thermometry in practical harsh combustion field.

Design and Implementation of High-Speed Multiwavelength Pyrometry Measurement System Based on CMOS Image Sensor

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

Development of Multispectral Thermal Imager for Measuring the Temperature of Long-Distance Explosion Flames

A high-speed, eight-wavelength visible light-infrared pyrometer for shock physics experiments

A sub-nanosecond pyrometer with broadband spectral channels for temperature measurement of dynamic compression experiments

Non-scanning Wide Range Multi-Wavelength Imaging Temperature Measurement Technology

Development of A Multi-Spectral Pyrometry Sensor for High-Speed Transient Surface-Temperature Measurements in Combustion-Relevant Harsh Environments

Improved Monochromatic Pyrometry for Synchronous Measurement of Full-Field Temperature and Deformation

Synchronous Measurement of Temperature and Deformation by an Ultraviolet Imaging System and Monochromatic Pyrometry at Extreme Temperatures

Measurement Performance of an Optical CCD-based Pyrometer System

Optical Temperature Sensor Based on Polysilicon Waveguides

[Research on parameters of dynamic colorimetric temperature sensor and it's application to fuel air explosion temperature field detection]

Thermometry in Dynamic and High-Temperature Combustion Filed Based on Hybrid Femtosecond/picosecond Coherent Anti-Stokes Raman Scattering

Recent Advances in the Development of A Multiwavelength Imaging Pyrometer

VIS-NIR Multispectral Synchronous Imaging Pyrometer for High-Temperature Measurements.

Synchronous Full-Field Measurement of Temperature and Deformation Based on Separated Radiation and Reflected Light

High-frequency flashing of light source for synchronous measurement of temperature and deformation at elevated temperature

Dynamic and Sensitive Hybrid Fs/ps Vibrational CARS Thermometry Using a Quasi-Common-path Second-Harmonic Bandwidth-Compressed Probe

Signal Processing Computer System for Multi-Wavelength Imaging Pyrometer

Multidimensional high-temperature field measurement method for flame based on near infrared radiation spectrum of water vapor

ANN-Assisted High-Resolution and Large Dynamic Range Temperature Sensor Based on Simultaneous Microwave Photonic and Optical Measurements