Abstract:Large airborne optical systems require very high beam pointing control accuracy , which will put forward some new challenges for the design of an airborne isolation platform .We analyze the characteristics of aircraft struc-tural vibration , and propose to develop a pneumatic and electromagnetic hybrid driving isolator .The isolator uses an adjustable pneumatic air spring with an external air container to suspend the payload , and a coaxial electromagnetic actuator is integrated with the output rod of the isolator , which provides a broadband active control force for the pay-load.The preliminarily determined carrying capacity is 150~190 kg and the isolation frequency range is from 1 Hz to 100 Hz.This paper firstly describes the principles of pneumatic /electromagnetic hybrid driving and presents a structural layout of the isolator .Then it simplifies the system , establishes the physical model , and derives the dy-namic equations of the isolator .Finally, the Matlab/Simulink numerical simulations of the isolator are conducted to research respectively the feasibility and efficiency of PID control algorithm and LQR control algorithms .The simula-tion results and their analysis show preliminarily that:(1) the two active control algorithms are efficient , and the payload′s vibration displacement amplitude can be reduced to ±10μm level under a wide frequency band ( 1~100 Hz) random vertical disturbance;(2) this vibration reduced performance of the isolator can meet the installation requirements of large airborne optical equipment .The comparison between the PID and LQR control methods shows that the vibration reduced performance of the PID method is slightly better than that of the LQR method for a single isolator system;besides, the PID method is easy to implement .

A Real-Time Linux Based Controller for Active Vibration Isolation Stewart Platform and the Experiment

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Dynamics and Control of a Bio-Inspired Stewart Platform

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Six-degree-of-freedom active vibration isolation using a stewart platform mechanism

Progress of Stewart Vibration Platform in Aerospace Micro–Vibration Control

Design and Simulation of an Active Vibration Isolator Based on Pneumatic-Electromagnetic Hybrid Driving

Analysis and Experiment of Micro-vibration Active Control Based on a Stewart Platform

Simulation and experiment of an active-passive isolator for micro-vibration control of spacecraft

Dynamic modeling and experiment of a hybrid passive/active Stewart vibration isolation platform

Investigation on Active Vibration Isolation of A Stewart Platform with Piezoelectric Actuators

Six degree-of-freedom active vibration control using the Stewart platforms

Active Vibration Isolation for Stewart Platforms Using Adaptive Backstepping Sliding Mode Control

Low-Frequency Control of Micro-Vibration Generation Using Stewart Platform Based on Adaptive Algorithm

Six Degree-of-freedom Hydraulic Hexapod Platform for Large-Amplitude Vibration Isolation

Design and Experimental Study of a VCM-Based Stewart Parallel Mechanism Used for Active Vibration Isolation

Modeling and Control of a Stewart Platform Based Six-Axis Hybrid Vibration Isolation System

Design of Stewart Active Vibration Isolation Platform Based on Voice Coil Motor

Design of active vibration isolation system for satellite optical load based on Stewart platform

Method of high precision pointing control for spacecraft system based on the active-passive integrated orthogonal micro-vibration isolation platform

A Real-time Linux based controller for micro-vibration generating with voice coil actuator