Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Development of Active Vibration Reduction (anti-rolling)Test System

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Research on Redress System of Vibration Table in Multi-Parameter Combined Environment Test System

State Space Lqg-Based Active Microvibration Control Of Micro-Manufacturing Platform

Active Vibration Isolation of a Micro-Manufacturing Platform Based on a Neural Network

Study on the Virtual Testing Platform of Vehicle Vibration Based on VR

Six-degree-of-freedom active vibration isolation using a stewart platform mechanism

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Active Vibration Isolation Platform with Eight Pneumatic Actuators

Six degree-of-freedom active vibration control using the Stewart platforms

Dynamic Analysis and Decoupling Control of Octo-Pneumatic Actuator Vibration Isolation Platform

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Simultaneous Decoupling Control of Translation and Rotation for a 6-DOF Vibration Isolator Based on the Stewart Platform

Decoupling Analysis and Decoupling Control of Vibration Isolation Platform with Eight Actuators

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

Vibration Control of Gough-Stewart Platform on Flexible Suspension

Method of high precision pointing control for spacecraft system based on the active-passive integrated orthogonal micro-vibration isolation platform

Design of a novel two-degree-of-freedom translational-rotation low-frequency vibration isolation platform

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

Progress of Stewart Vibration Platform in Aerospace Micro–Vibration Control

The Multi-Body System Modelling of the Gough–Stewart Platform for Vibration Control