Abstract:In order to promote the research and development on evaluating the seismic performance of structures, China State Construction Engineering Corporation (CSCEC) planned to construct a large-scale loading testing facility, the Multi-Function Testing System (MFTS). This facility can perform full-scale, real-time, 6-degree-of-freedom static and dynamic testing of rubber bearings and many types of structural components including long columns, shear walls and cross shape joints. The basic performances of the MFTS are a clearance of 9.1 m x 6.6 m x 10 m for specimen installation, maximum x-directional displacement 1500 mm, maximum y-directional velocity 1570 mm/s and maximum z-directional compressive load 108 MN. The system configuration and performance specifications of the MFTS are presented in this paper. The inverse kinematics model and the nonlinear model of the hydraulic servosystem of the MFTS are built. A modified feedback forward kinematics algorithm is developed for real-time control of the MFTS. Internal force characteristics of the loading system are analyzed. The internal force control method based on real-time solution of basis of internal force space is proposed for the system with large motion ranges. The motion controller combining position control loop and internal force control loop is developed. To meet the requirement of simultaneously imposing vertical compressive load and horizontal displacement, a mixed load and displacement controller is designed, where a direct force control loop is used to improve the response speed of the force control and reduce spatial dynamic coupling effects. Finally, a dynamic bearing testing is performed. The test results demonstrate that the system using the proposed controller has good abilities on position tracking, force balance, and load following.

Research on Redress System of Vibration Table in Multi-Parameter Combined Environment Test System

The Control of Vibration Table on the Centrifugal Force Field

Study on Control Method and System of Multi-Shaker Random Vibration Test

Control Strategy for Multi-Exciter Random Vibration Test

Study on Electromechanical Coupling Characteristics of Electric Vibration Table in High-Translational-Acceleration

Testing System of Characteristics of Electrical Vibration Table

Development of Centrifuge for Multi-Parameter Combined Environmental Test

Progress in Multi-Exciter Vibration Testing Control Technology

Design and Implementation of Vibration Test Control System of Multi-Exciter Synchronization

Research On Three-Variable Control Technology Of Seismic Simulating Shaking Tables

Study on Test System of Thermal-Vibration Combined Envir Onment under High Linear Acceleration

Analysis on Dynamic Characteristics and Design of Centrifuge

A Novel Three-Parameter Tuning Method For Seismic Simulation Shaking Table

Thermal-Vibration Combined Environment Under High Linear Acceleration

Research of Multi-axis Vibration Testing Control Technology

Research Summary of the Multiparameter Combined Environmental Test of Spacecraft Component Reliability

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Modeling and Vibration Decoupling Control of Multi-Axial Shaking Table

Modeling and Control of the CSCEC Multi-Function Testing System

Development of Active Vibration Reduction (anti-rolling)Test System

Research on Structural Dynamic Characteristics Based on Electromechanical Transfer Function Using Vibration Test Data