Abstract:This paper theoretically and systematically investigates: (1) the effect of local transformed strains within deformation twinning on twin intersection; (2) the fracture mode based on type I co-zone tensile twin intersection in coarse-grained magnesium alloys, as well as the impacts of twin intersection and grain diameter on interfacial crack nucleation along twin boundaries; and (3) the influence of the local stresses arising from the encountered twin bands on crack growth. A novel dislocation-based strain nucleus model and a Green's function method, which are applicable to any material with local transformations in which elastic properties are reasonably approximated as isotropic, are specifically employed to model the concentrated transformed strain and calculate the local stress field resulting from deformation twinning and the stress intensity factors at crack tips in the magnesium alloys, respectively. In addition, an electron backscatter diffraction (EBSD) measurement is provided for crack nucleation originating from Type I co-zone tensile twin intersection. The theoretical modeling indicates: (i) the local strains within barrier twins strongly dictate the growth of incident twins and enhance the twin propagation stress; (ii) larger grains favor brittle fracture. More specifically, the dislocation reactions and pile-ups at the junctions between tensile twins can result in interfacial crack nucleation and growth along the twin boundaries, which is a brittle fracture mode based on lower twinning stress and stress concentration in the coarse-grained magnesium alloys; and (iii) the direction of crack propagation is easily changed by high-density twin bands and twin intersections owing to the local strains.

The Influence of Linear Defect on Twin Movement under A Shear Loading in Magnesium Single Crystal

Statistical Analysis Of Grain-Scale Effects Of Twinning Deformation For Magnesium Alloys Under Cyclic Strain Loading

The Effect of Tension Twin on the Dynamic Recrystallization Behavior in Polycrystal Magnesium by Atomistic Simulation

Theoretical Study on the {1¯012} Deformation Twinning and Cracking in Coarse-Grained Magnesium Alloys

Deviations from Theoretical Orientation Relationship Along Tensile Twin Boundaries in Magnesium

Twin-solute, twin-dislocation and twin-twin interactions in magnesium

Characteristics of Twin Lamellar Structure in Magnesium Alloy During Room Temperature Dynamic Plastic Deformation

Compression Deformation Mechanisms at the Nanoscale in Magnesium Single Crystal

Deformation twin nucleation and twin variant selection in single crystal magnesium as a function of strain rate

Experimental and Numerical Investigation of Anisotropic and Twinning Behavior in Mg Alloy under Uniaxial Tension

The Role of {10–12} Tensile Twinning in Plastic Deformation and Fracture Prevention of Magnesium Alloys

Nucleation and Growth Mechanisms of Nanoscale Deformation Twins in Hexagonal-Close-packed Metal Magnesium

The Influence of Lamellar Twins on Deformation Mechanism in Nanocrystalline Magnesium under Uniaxial Compression

Towards understanding double extension twinning behaviors in magnesium alloy during uniaxial tension deformation

THE MECHANISM OF {101̅2} DEFORMATION TWINNING IN MAGNESIUM

Atomistic Simulation of the Structural Evolution in Magnesium Single Crystal under C-Axis Tension

Plasticity Induced by Twin Lamellar Structure in Magnesium Alloy

Asymmetric Growth Of Tensile Twins In Magnesium

Modeling Twinning, Detwinning, and Dynamic Recrystallization of Magnesium Alloys

Three-dimensional Shape and Stress Field of a Deformation Twin in Magnesium

Impact-induced Twinning in a Magnesium Alloy under Different Stress Conditions