Abstract:Interrupted tensile testing along the normal direction of a rolled AZ31 magnesium plate was conducted at various strain levels from 6% to 15.5%. Prior to deformation the specimens were annealed for grains to coarsen such that multiple twin variants in one grain can be activated and interaction between variants can be better resolved. The grain structure and texture evolution were then examined via electron backscatter diffraction. The results reveal that multiple primary {101̅2}P twin variants inside individual grains grow and impinge, forming profuse boundaries of 60°〈011̅0〉 orientation relationship. These boundaries are close to {112̅2}〈112̅3̅〉 twin relationship, however, they are not formed by twin nucleation and are only a product of interaction between the primary twins. The morphology of these special boundaries are highly irregular. Atomistic simulations were performed to understand such interaction, and the results show that such 60° 〈011̅0〉 boundaries have limited mobility. Thus, a primary twin variant is able to grow at the expense of other primary twin variants. Our experimental results also show that {101̅2} twinning is active throughout the deformation until the specimens are fractured. As the strain increases, secondary {101̅2}S twins are activated inside the primary twins. As the strain further increases to near fracture, {101̅1}S secondary twins are activated inside the primary twins, followed by activation of tertiary {101̅2}T twins inside the {101̅1}S secondary twins, a process known as {101̅1}−{101̅2} double twinning. The formation of irregular 60°〈011̅0〉 boundaries and the sequential twinning at large strains shed new light on the twinning mechanism in Mg and other hexagonal close-packed metals.

Deviations from Theoretical Orientation Relationship Along Tensile Twin Boundaries in Magnesium

Crystallography of deformation twinning in hexagonal close-packed metals. Revisiting the case of the (56 deg, a) contraction twins in magnesium

Theoretical Study on the {1¯012} Deformation Twinning and Cracking in Coarse-Grained Magnesium Alloys

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

Characterizing the Boundary Lateral to the Shear Direction of Deformation Twins in Magnesium

Experimental and Numerical Investigation of Anisotropic and Twinning Behavior in Mg Alloy under Uniaxial Tension

Detwining In Mg Alloy With A High Density Of Twin Boundaries

Proliferation of Twinning in HCP Metals: Application to Magnesium

Three-dimensional Shape and Stress Field of a Deformation Twin in Magnesium

Twinning-like Lattice Reorientation Without a Crystallographic Twinning Plane.

Formation of 60° 〈011̅0〉 Boundaries Between

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

Towards understanding double extension twinning behaviors in magnesium alloy during uniaxial tension deformation

The Role of {10–12} Tensile Twinning in Plastic Deformation and Fracture Prevention of Magnesium Alloys

THE MECHANISM OF {101̅2} DEFORMATION TWINNING IN MAGNESIUM

The Influence of Linear Defect on Twin Movement under A Shear Loading in Magnesium Single Crystal

Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension

Plastic deformation mechanisms of nanotwinned Mg with different twin boundary orientations: molecular dynamics simulations

Asymmetric Growth Of Tensile Twins In Magnesium

Characteristic boundaries associated with three-dimensional twins in hexagonal metals

Investigation of Twin–twin Interaction in Deformed Magnesium Alloy