Abstract:A passive mode-locked fiber laser-delivered 13 ps pulse is saturatedly amplified with a four-stage amplifier chain. 125 W high power all-fiber picoseconds pulse laser is demonstrated in a 15-μm fiber core, and the optical-to-optical conversion efficiency of the main amplifier is up to 86.12 %. A home-made (6 + 1) × 1 fiber combiner is used to couple the pump light and signal light into the gain double cladding fiber. In order to suppress the nonlinear effects in high-power picosecond fiber amplifiers, the repetition rate of the seed pulse is increased from 60 MHz to ~1 GHz; also the gain fibers are advisably selected. The amplified output spectrum is symmetrically broadened to several nanometers due to self-phase modulation (SPM). No stimulated Raman scattering (SRS), amplified spontaneous emission (ASE) and residual pump light are observed and the optical signal-to-noise ratio is more than 30 dB. The all-fiber picoseconds MOPA laser in this report can be easily performed with the conventional fiber handing equipments, and it has great potential to be applied as pump source in the fields of optical parametric oscillator, laser frequency-doubling and supercontinuum generation.

Efficient, 62.5 Watts All-Fiber Single-Mode 1091 Nm MOPA Laser

All-fiber high power 1091 nm MOPA laser

90.4-W All-Fiber Single-Frequency Polarization-Maintained 1 083-Nm MOPA Laser Employing Ring-Cavity Single-Frequency Seed Oscillator

122-W High-Power Single-Frequency MOPA Fiber Laser in All-Fiber Format

1016Nm All Fiber Picosecond Mopa Laser with 50w Output

Narrow-linewidth High Power Fiber Laser with Output Power of 334 W in All-Fiber MOPA Format

100 W all fiber picosecond MOPA laser.

All-fiberized Tm-doped Fiber MOPA with 30-W Output Power

29.2 W, 20 Khz Linewidth All Fiber Single-Frequency MOPA Laser

22 W Single Mode Tm-Doped Fiber Mopa in All-Fiber Format

High efficiency, high repetition rate, all-fiber picoseconds pulse MOPA source with 125 W output in 15 μm fiber core

A 168-W High-Power Single-Frequency Amplifier in an All-Fiber Configuration

High-Efficiency Watt-Level 1014 Nm Single-Frequency Laser Based on Short Yb-Doped Phosphate Fiber Amplifiers

96.2 W All-Fiberized Nanosecond Single-Frequency Fiber MOPA

High-Power 1120-Nm Yb-Doped Fiber Laser and Amplifier

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

2.02 kW and 4.7 GHz linewidth near-diffraction-limited all-fiber MOPA laser

Single Mode Mopa Structured All-Fiber Yb Pulse Fiber Amplifier at Low Repetition

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

140 W High Power All-Fiber Laser at 1940 Nm with Narrow Spectral Line-Width by MOPA Configuration

A 3.2 Kw Single Stage Narrow Linewidth Fiber Amplifier Emitting at 1050 Nm