Abstract:Based on computational fluid dynamics, chemical reaction kinetics, principles of transfer in metallurgy, and other principles, a multi-fluid model for a traditional blast furnace was established. The furnace conditions were simulated with this multi-fluid mathematical model, and the model was verified with the comparison of calculation and measurement. Then a multi-fluid model for an oxygen blast furnace in the gasifier-full oxygen blast furnace process was established based on this traditional blast furnace model. With the established multi-fluid model for an oxygen blast furnace, the basic characteristics of iron ore reduction process in the oxygen blast furnace were summarized, including the changing process of the iron ore reduction degree and the compositions of the burden, etc. The study found that compared to the traditional blast furnace, the magnetite reserve zone in the furnace shaft under oxygen blast furnace condition was significantly reduced, which is conducive to the efficient operation of blast furnace. In order to optimize the oxygen blast furnace design and operating parameters, the iron ore reduction process in the oxygen blast furnace was researched under different shaft tuyere positions, different recycling gas temperatures, and different allocation ratios of recycling gas between the hearth tuyere and the shaft tuyere. The results indicate that these three factors all have a substantial impact on the ore reduction process in the oxygen blast furnace. Moderate shaft tuyere position, high recycling gas temperature, and high recycling gas allocation ratio between hearth and shaft could significantly promote the reduction of iron ore, reduce the scope of the magnetite reserve zone, and improve the performance of oxygen blast furnace. Based on the above findings, the recommendations for improvement of the oxygen blast furnace design and operation were proposed.

A new technic experimental study on precise reduction of iron oxide-separation of non-molten of iron oxide

Experimental Research of New Technology on the Precise Reduction of Micron-Sized Iron Oxide

Study of Scale Effect on the Iron Oxide Reduction

The Preparation of High-Purity Iron (99.987%) Employing a Process of Direct Reduction–Melting Separation–Slag Refining

Experimental Research on Fine Reduction of EAF Dust at Xinyesteel

Experimental Study on Reduction of Ultra-Fine Hematite Powder at Non-Molten State

Numerical Study of the Reduction Process in an Oxygen Blast Furnace

New technique of superpure iron powder using coal-based direct reduction

Experiments on the Coal-based Direct Reduction-Magnetic Separation of a Refractory Iron Ore

A high-efficiency separation process of Fe and Zn from zinc-bearing dust by direct reduction

Experimental Study on Reduction of Ultra-fine Hematite Powder

A novel process of reverse flotation-hydrogen reduction for preparation of high-purity iron powder with superior magnetite concentrate

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Study on new manufacture technology of high quality red iron oxide from ferrous sulfate

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

Preparing High-Purity Iron by Direct Reduction‒smelting Separation of Ultra-High-grade Iron Concentrate

An efficient and clean utilization technique for red mud based on fluidized bed carbon monoxide reduction

Reduction Behavior and Mechanism of Iron Ore in Molten Iron in the Process of Converter Steelmaking

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

Research on Separating Tin and Iron from Tin-bearing Iron Concentrate by CO Reduction

Reduction kinetics of iron ore concentrate particles relevant to a novel green ironmaking process