Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Novel CO2 Capturer Derived from SBA-15 Monolith Coated with Amine

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Efficient CO_2 Capturer Derived from As-synthesized Mesoporous Silica Modified with Amines

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

CO2 Capture by As-Prepared SBA-15 with an Occluded Organic Template

Efficient CO2 Capturer Derived from As-Synthesized MCM-41 Modified with Amine.

Adsorption of Carbon Dioxide on Organically Functionalized Sba-16

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Amine-tethered Adsorbents Based on Three-Dimensional Macroporous Silica for CO(2) Capture from Simulated Flue Gas and Air.

Amine-grafted on boron modified SBA-15 for direct air capture of CO2

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Sponges with covalently tethered amines for high-efficiency carbon capture

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

One-pot synthesis of the amine-modified meso-structured monolith CO2 adsorbent

Efficient and stable CO2 capture using a scalable and spontaneous cross-linking amine-functionalized nano-Al2O3 adsorbent

Development of amine-pillar[5]arene modified porous silica for CO2 adsorption, and CO2/CH4, CO2/N2 separation

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

High yield nitrogen-doped carbon monolith with rich ultramicropores prepared by in-situ activation for high performance of selective CO2 capture