Abstract:Post-combustion carbon capture using amine-based adsorbents is a highly competitive approach to control CO2 emissions from fossil fuel-fired power plants. However, it is well known that amine-based adsorbents suffer from long-term stability issues due to amine poisoning by flue gas contaminants. Minor contaminants, such as SO2, can preferably react with amine sites to form irreversible sulfonamides. This work investigated the effect of nitrates on the SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid-functionalized SBA-15 for CO2 capture. The tetraethylenepentamine-functionalized SBA-15 without nitrates was prepared as the control. The CO2 adsorption capacity was measured over multiple capture cycles in the presence of 500 ppm SO2. The CO2 capture capacities of the sorbent without nitrates decreased by 1.48 mmol g(-1) (50.3%) over 11 capture cycles. After introducing nitrates into the sorbent, the CO2 adsorption capacities only decreased by 0.55 mmol g(-1) (21.8%). In addition, the nitrates restricted the reaction between amine groups and SO2 leading to reversible sulfonamide products. The significant improvement in SO2 resistance was further explained with density functional theory (DFT) calculations, which revealed that the binding energy and net charge transfer between SO2 and amine groups were decreased after introducing the nitrate group into the amine. To further investigate the regenerability and structural stability of tetraethylenepentammonium nitrate-functionalized SBA-15 for CO(2 )capture under realistic conditions, the long-term operating performance was evaluated in a gas mixture of 150 ppm SO2, 150 ppm NO, 100% RH, 15% CO2, and balance N-2. The CO2 adsorption capacities and the structural properties of nitrate-containing sorbents were nearly unchanged over eight adsorption/regeneration cycles.

Amine-grafted on boron modified SBA-15 for direct air capture of CO2

Significantly Enhancing CO2 Adsorption on Amine-Grafted SBA-15 by Boron Doping and Acid Treatment for Direct Air Capture

Adsorption of Carbon Dioxide on Organically Functionalized Sba-16

Aminosilanes grafted to basic alumina as CO2 adsorbents--role of grafting conditions on CO2 adsorption properties

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

CO2 Capture by the Amine-modified Mesoporous Materials

Enhancing Adsorbent Performance for Direct Air Capture of CO2 by In-Situ Amine-Grafting of Layered Double Hydroxides

Amine-modified SBA-15: Effect of pore structure on the performance for CO2 capture

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

Novel CO2 Capturer Derived from SBA-15 Monolith Coated with Amine

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Minimizing usage of silane coupling agent for amine-grafted mesoporous silica CO2 adsorbent

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Use of Ball Drop Casting and Surface Modification for the Development of Amine-Functionalized Silica Aerogel Globules for Dynamic and Efficient Direct Air Capture.

A comparative study on energy efficient CO2 capture using amine grafted solid sorbent: Materials characterization, isotherms, kinetics and thermodynamics

Improving the direct air capture capacity of grafted amines via thermal treatment

Enhanced SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid functionalized SBA-15 during CO2 capture from flue gas

Effect of Amine Structure on CO 2 Capture Performance of Amine-Modified SBA-15

Amine-grafted MIL-101(Cr) and Cu-BTC via post-synthetic modification for synergistic enhancement of CO 2 uptake

Feasibility and Effectivity of an Amine-Grafted Alumina Adsorbent for Direct Air Capture.

Synthesis, characterization and CO2 capture of mesoporous SBA-15 adsorbents functionalized with melamine-based and acrylate-based amine dendrimers