Abstract:Coaxial powder feeding technology in the field of metal additive manufacturing is booming. In this paper, a new laser cladding nozzle with powder feeding channels of inner and outer rings is designed. The nozzle works with a new kind of laser, which is a new heat source with an inner beam and outer beams. The water-cooling channels are simulated in Ansys Workbench. The simulation results present the temperature distribution of the working nozzle and the velocity of the cooling water. The thermal dilation of the nozzle in the working environment is also simulated. The results show that the loop water cooling channel could effectively reduce the high temperature of the nozzle down to about 200 °C. In addition, it could well restrain the thermal deformation of the nozzle lower to 0.35 mm. The equivalent stress of most parts is controlled under 360 MPa. Then, the powder flows of the inner and outer rings of the multiple powder feeding channels are simulated in Ansys Fluent. The convergence effect of the powder flow could be assumed and some significant parameters, such as the velocity, are acquired. The results present that these multiple powder feeding channels could realize the generation and removal of removable supports of workpieces with highly complex shapes and achieve a large processing range and good processing efficiency. The velocity of the powder flow at the outlet is elevated to about 5 mm/s. Then, the thermal cladding states under the new laser heat source of the powder are simulated in Workbench. The temperature of the melting process and the thermal deformation and the equivalent stress/strain of the additive parts are obtained in the emulation. The results emerge that the powder melting range and the ascending temperature of the melting pool are improved with this effect. The greatest temperature of the melting pool is about 2900 °C in the machining process, and the maximum thermal equivalent stress is 1.1407 × 1010 Pa.

Effect of Coaxial Powder Nozzle Design Parameters and the Gas Flow on the Powder Gathering Characteristics

Simulation and Experimental Research Based on Carrier Gas Flow Rate on the Influence of Four-Channel Coaxial Nozzle Flow Field

Powder flow simulation of a ring-type coaxial nozzle and cladding experiment in laser metal deposition

Numerical Study on Powder Stream Characteristics of Coaxial Laser Metal Deposition Nozzle

Coupling Characteristics of Powder and Laser of Coaxial Cone Nozzle for Laser Direct Metal Deposition: Numerical Simulation and Experimental Study

Simulation and Optimal Control of Fluidized Bed Based Powder Feeder for Laser Remanufacturing

Study of optimization features of gas-powder jets created by a coaxial nozzle with divided powder supply during direct laser deposition of materials

Numerical simulation and experimental investigation on powder transport of a new-type annular coaxial nozzle

Adaptive powder nozzle setup for enhanced efficiency in laser metal deposition

Impact of process flow conditions on particle morphology in metal powder production via gas atomization

Design and Numerical Analysis of an Inside-Beam Powder Feeding Nozzle for Wide-Band Laser Cladding

Study on the Powder Feeding Technique during Laser Micro Cladding Deposition Manufacturing of TC4 Powder

3D analysis of gas flow behavior and particle acceleration characteristics in cold spray additive manufacturing based on non-axisymmetric numerical models

Numerical simulation of powder effect on solidification in directed energy deposition additive manufacturing

Prediction of deposit characteristics based on the discrete coaxial nozzle during laser direct metal deposition

Coupled Computational Fluid Dynamics-Discrete Element Method Model for Investigation of Powder Effects in Nonconventional Laser Powder Bed Fusion Process

Influence of shielding gas flow consistency on parts quality consistency during large-scale laser powder bed fusion

Simulation and Experimental Investigation of Fe-based Alloy Powder Production by Gas Atomization

Effects of gas flow parameters on droplet spatter features and dynamics during large-scale laser powder bed fusion

Design a New Type of Laser Cladding Nozzle and Thermal Fluid Solid Multi-Field Simulation Analysis

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging