Abstract:Although high-speed powder spreading can efficiently enhance the productivity of laser powder bed fusion (LPBF) additive manufacturing, it is rarely used because it is generally believed to be unfavourable for the part quality. However, there is no systematic investigation to confirm this "common sense". In this work, a series of powder spreading and melting experiments are carried out to investigate the role of the spreading speed in LPBF. In the single-layer experiments, the high-speed powder spreading indeed reduces the packing density of the powder layer and seems unfavourable as expected. However, the multilayer LPBF processes of cubic samples with various high powder-spreading speeds are successful, and the samples possess even fewer defects and thus better mechanical properties particularly fatigue life, which is counterintuitive and has never been reported before. To understand the physical mechanisms, we fabricate staircase samples under different powder spreading speeds, revealing the layer-by-layer evolution of the powder bed and deposited dense region. It is found that regardless of the powder spreading speed, the actual powder layer thickness gradually increases due to the shrinkage during powder melting, but always reaches the steady state in ∼10 layers, where the deposited dense layer thickness is equal to the nominal powder layer thickness, thereby achieving similar melting condition and quality. Furthermore, LPBF experiments with intended operational delays in the powder spreading procedure are conducted and prove our speculation that the slightly reduced pores and cracks in the samples fabricated with high-speed powder spreading are mainly attribute to the reduced cooling time between layers and consequently the higher temperature before next-layer melting as well as lower temperature gradients. The major drawback with the higher powder spreading speed is also discussed, which is the reduction of the dimensional accuracy of the fabricated sample along the building direction. This study provides unprecedented insight into the role of powder spreading speed in LPBF and corrects the inaccurate intuition that high-speed powder spreading is always unfavourable, which provides more potential solutions to enhance the productivity and part quality of LPBF.

Influence of shielding gas flow consistency on parts quality consistency during large-scale laser powder bed fusion

Effects of gas flow parameters on droplet spatter features and dynamics during large-scale laser powder bed fusion

Influence of shielding gas flow on pore evolution in AlSi10Mg/In718 alloy by laser powder bed fusion

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

A Comprehensive Model to Predict Friction Factors of Fluid Channels Fabricated Using Laser Powder Bed Fusion Additive Manufacturing

Numerical studies of melt pool and gas bubble dynamics in laser powder bed fusion process

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Laser Powder Bed Fusion: A Review on the Design Constraints

Is high-speed powder spreading really unfavourable for the part quality of laser powder bed fusion additive manufacturing?

Influence of scale effect on surface morphology in laser powder bed fusion technology

Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion

Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Influence of powder size on defect generation in laser powder bed fusion of AlSi10Mg alloy

Optimization of the gas flow system in a selective laser melting chamber using numerical methods

Influence of Laser Energy Input and Shielding Gas Flow on Evaporation Fume during Laser Powder Bed Fusion of Zn Metal

Metal Vaporization and Its Influence During Laser Powder Bed Fusion Process

Particle-scale computational fluid dynamics study on surface morphology of GH4169 superalloy during multi-laser powder bed fusion with low energy density

Formation mechanisms and control strategies of metallurgical defects and microstructures during laser powder bed fusion of AlSi10Mg lattice structures

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Particle scale modelling of powder recoating and melt pool dynamics in laser powder bed fusion additive manufacturing: A review