Abstract:This study investigates the strain-rate triggered PLC effect and fracture behavior of a rapidly solidified thin strip (TS) cast AA5182 alloy in comparison with those of direct chill (DC) counterparts. Higher cooling rates obtained via TS casting suppress the formation of phases in Al-Mg alloys and significantly enhance the matrix solute supersaturation beyond the equilibrium level, thereby impacting the interaction dynamics of mobile dislocations and solute atoms. This in turn affects the evolution of typical stress fluctuations in Al-Mg alloys, referred to as the Portevin-Le Chatelier (PLC) effect, occurring in specific strain rate-temperature domains, i.e., with type and characteristics dependent upon the microstructure. Tensile testing demonstrated a strain-rate dependent PLC effect, also aligning with the ductility trend in both negative and positive strain-rate sensitivity domains. The characteristics of PLC bands, as well as the magnitude of stress fluctuations, were shown to evolve with strain rate, facilitating distinct fracture mechanisms. In particular, the TS sample exhibited a higher strain rate sensitivity of the fracture mechanisms and PLC band characteristics and, thus, a narrower range of deformation rates for optimum ductility (attributed to increased solute in the matrix). Controlling the deformation rate to favor predominantly Type-B serrations and ensuring their stability with minimal fluctuations was shown to postpone necking and prevent material failure. The significance of rate sensitivity in alloys with reduced microsegregation is emphasized, suggesting the need for further exploration of mechanical properties.

Fast Fourier Transform on Analysis of Portevin-Le Chatelier Effect in Al 5052

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

The Portevin-Le Chatelier Effect in Al-Mg Alloy Investigated by Infrared Pyrometry

Recurrence analysis of the Portevin-Le Chatelier effect

Characterization of Portevin–Le Chatelier Effect in Aluminum Alloy AA5052 under Strain-Controlled Tensile Test Via Digital Image Correlation and Acoustic Emission

EFFECT OF PRECIPITATE ON PLC EFFECT IN 2024 Al ALLoY

Strain Ratio Effects on Low-Cycle Fatigue Behavior and Deformation Microstructure of 2124-T851 Aluminum Alloy

Effective dimensionality of the Portevin - Le Chatelier effect

On the spatio-temporal characteristics of the Portevin-Le Chatelier effect in aluminium alloy AA5182: An experimental and numerical study

Fracture behavior of a rapidly solidified thin-strip continuous cast AA5182 Al-Mg alloy with the Portevin-Le Chatelier effect under varying strain rates

Numerical Analysis on the Spatiotemporal Characteristics of the Portevin-Le Chatelier Effect in Ti-12Mo Alloy

Comparative study of the Portevin-Le Chatelier effect in interstitial and substitutional alloy

Experimental investigations on kinetics of Portevin–Le Chatelier effect in Al–4wt.%Cu alloys

White-Light Digital Speckle Image Correlation Analysis of the Portevin-Le Chatelier Shearing Band in Multiscale

Spatiotemporal aspects of the Portevin–Le Chatelier effect in annealed and solution-treated aluminum alloys

In Situ Analysis of the Portevin-Le Chatelier Effect from Low to High-Entropy Alloy in Equal HfNbTaTiZr System

Observation of Portevin-Le Chatelier serrations in 6061-O aluminum alloy under ultra-low-frequency vibration-assisted tension

Investigation on the Portevin-Le Chatelier Deformation Bands in Al-Cu Alloys

Thermal Analyses and Simulations of the Type A and Type B Portevin–Le Chatelier Effects in an Al–Mg Alloy

Spatial characteristics of the Portevin-Le Chatelier deformation bands in Al-4 at%Cu polycrystals

The Effect of Solution Treatment on the Spatial Behavior of the Portevin-Le Chatelier Effect in Al-Cu Alloys