Abstract:In order to study the underground coal-gasification process, Aspen Plus software was used to simulate the lignite underground gasification process, and a variety of unit operation modules were selected and combined with the kinetic equations of coal underground gasification. The model can reflect the complete gasification process of the coal underground gasifier well, and the simulation results are more in line with the experimental results of the lignite underground gasification model test. The changes in the temperature and pressure of oxygen, gasification water, spray water, and syngas in pipelines were studied, and the effects of pipe diameters on pipeline conveying performance were investigated as well. The effects of the oxygen/water ratio, processing capacity, and spray-water volume on the components of syngas and components in different reaction zones were studied. In addition, the change tendency of gasification products under different conditions was researched. The results indicate that: (1) The depth of injection and the formation pressure at that depth need to be taken into account to determine a reasonable injection pressure. (2) The liquid-water injection process should select a lower injection pressure. (3) Increasing the oxygen/water ratio favors H2 production and decreasing the oxygen/water ratio favors CH4 production. (4) The content of CO2 is the highest in the oxidation zone, the lowest in the reduction zone, and then increases a little in the methanation reaction zone for the transform reaction. The content of CO is the lowest in the oxidation zone and the highest in the reduction zone. In the methanation reaction zone, CO partially converts into H2 and CO2, and the content of CO is reduced. (5) The injection of spray water does not affect the components of the gas but will increase the water vapor content in the gas; thus, this changes the molar fraction of the wet gas.

Simulation and Analyzing of the 200kt/a Sulfur-Buring Sulfuric Acid Process

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Modeling and Simulation Research onm-Xylene Oxidation Reactor

Simplified Logistics Model and Its Application in Process Simulation

Flowsheet Modeling and Simulation for an Industrial Soda Plant

Analysis of Process Control Performance for an Industrial Demethanizer Based on Dynamic Simulation

Simulation of Wet FGD Based on ASPEN PLUS

Simulation and optimization of ammonia-based flue gas desulfurization process

Modeling and Simulation of an Improved Ammonia-Based Desulfurization Process for Claus Tail Gas Treatment

Simulation Analysis of A Gtl Process Using Aspen Plus

Modeling and Flowsheeting of the Coal-Gasification Wastewater Treatment Process

Simulation and analysis of coal based syngas methanation process based on Aspen Plus

Exergy-economic Analysis and Optimisation of Sulphuric Acid Production from Sulphur Based on Aspen Simulation

Process simulation of wet flue-gas desulphurization

Modeling and Simulation of A Multistage Absorption Hydration Hybrid Process Using Equation Oriented Modeling Environment

Simulation of Underground Coal-Gasification Process Using Aspen Plus

Dynamic Modelling and Simulation of the Sulphur Dioxide Converter in an Industrial Smelter

Simulation-Based Optimization of a Multiple Gas Feed Sweetening Process

Kinetic Modeling Study of the Industrial Sulfur Recovery Process for Operating Condition Optimization

Simulation of two-stage coal gasfication process on ASPEN PLUS