Abstract:Using ternary molten salt with a molar ratio of NaCl:KCl:CsCl = 30:24.5:45.5 and ZrCl4 as raw materials to prepare a NaCl-KCl-CsCl-Cs2ZrCl6 composite electrolyte. Characterizing by XRD, ICP-AES, optical microscopy and SEM-EDS, the results showed that when the molar ratio of CsCl:ZrCl4 ≥ 2:1, Cs2ZrCl6 was generated according to the stoichiometric reaction; when the molar ratio of CsCl:ZrCl4 < 2:1, CsCl in molten salt was almost completely converted to Cs2ZrCl6, and there was a ZrCl4 phase. When the molar ratio of CsCl:ZrCl4 = 2:1, with the increase of the reaction temperature and reaction time, the concentration of zirconium ions first increased and then decreased. The optimized preparation process conditions are: the 2:1 molar ratio of CsCl to ZrCl4 in NaCl-KCl-CsCl, 500 °C of reaction temperature of and 3 h of reaction time. Under this condition, 99.68% conversion rate from ZrCl4 to Cs2ZrCl6 was obtained. Taking the prepared NaCl-KCl-CsCl-Cs2ZrCl6 composite electrolyte as a raw material, a preliminary study of molten salt electrolytic refining zirconium was carried out, and a refined zirconium product with a dendrite of 10.61 mm was obtained under the conditions of a zirconium ions concentration of 5%, an electrolysis temperature of 750 °C, a current density of 0.1 A/cm2, and an electrolysis time of 9 h, indicating that the composite electrolyte can be used for the electrolytic refining of zirconium.

Electrochemical Synthesis of Zirconium Ethoxide and the Electrochemical Behaviors of Zirconium in the Process

Processing of Zirconium Oxide Raw Materials to Produce Zirconium Silicides via Electrolysis of KCl-K2SiF6-ZrO2 Melt

Preparation of zirconium metal through electrolysis of zirconium oxycarbonitride anode

Ionothermal Synthesis and Characterization of Crystalline Zirconium Phosphate from Oxalic Acid/Tetrapropyl Ammonium Bromide System

Ionothermal synthesis of zirconium phosphates and their catalytic behavior in the selective oxidation of cyclohexane.

Electrochemical Studies on the Redox Behavior of Zr(IV) in the LiCl-KCl Eutectic Molten Salt and Separation of Zr and Hf

Condition Dependence of Zr Electrochemical Reactions and Morphological Evolution of Zr Deposits in Molten Salt

Preparation and Application of a NaCl-KCl-CsCl-Cs2ZrCl6 Composite Electrolyte

Review—Preparation of Zirconium Metal by Electrolysis

Preparation of Zirconia Powders by Sol-gel Process

Study of Coatings Formed on Zirconium Alloy by Plasma Electrolytic Oxidation in Electrolyte with Submicron Yttria Powder Additives

The synthesis, characterization and electrochemical study of zirconia oxide nanoparticles for fuel cell application

Application of photo-electrochemical methods in investigation of oxidation zirconium and its alloys

Aqueous sol–gel synthesis of zirconium titanate (ZrTiO4) nanoparticles using chloride precursors

Synthesis of ceramic surface on Zr alloy using plasma electrolytic oxidation in molten salt

Electrocatalytic Oxygen Reduction Using Metastable Zirconium Suboxide

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders

Zirconium Oxide for PEFC Cathodes

Studies of spectroscopy and cyclic voltammetry on a zirconium hexacyanoferrate modified electrode

Zirconium-based metal-organic frameworks and their roles in electrocatalysis

In-situ hydrogen charging of zirconium powder to study isothermal percipitation of hydrides and determination of Zr-hydride crystal structure