Abstract:The vertical and horizontal bending of micro-beams subjected to axial compressive and transverse concentrated loadings is a common lateral deformation in micro-/nano-engineering that plays a significant role in the design and optimization of micro-/nano-devices. The present study aims to investigate it using the nonlocal theory. For this purpose, the simplified mathematical model is developed, and the nonlocal differential constitutive equation is applied. Since the mechanical properties of micro-beams are different from those of macro-beams, the non-classical nonlocal bending moment is introduced to improve the classical bending formulation in order to adapt to the vertical and horizontal bending of micro-beams. The effects of the external load, external size, structural stiffness, and internal characteristic scale on the vertical and horizontal bending deformation including the midpoint deflection and critical compression are presented. The present analytical model and results are validated by the finite element method. It is shown that the critical compression decreases with increasing the internal characteristic scale. Moreover, the midpoint deflection varies remarkably with respect to the axial and transverse loadings, structural stiffness, internal characteristic scale, and external size. An obvious nonlocal scale effect is found, in which the internal characteristic scale cannot be neglected compared with the external size. Besides, a threshold value of the structural stiffness is determined, and the connotation of the nonlocal interaction requires that the structural stiffness shall not be lower than that threshold. A mutual restriction between structural stiffness and external loadings is observed in the vertical and horizontal bending. In particular, it is further proved that the classical continuum mechanics can not be used in micro-/nano-scaled mechanics through a strange phenomenon that is contrary to mechanical common sense in the calculation example. The study is expected to be beneficial to the design and application of micro-beams subjected to the vertical and horizontal bending.

Analysis For Bending Of Elastic Bimetal Beams

Elastic flexural-torsional buckling of thin-walled cantilevers

Elastic Buckling of Inter-Braced Parallel Beam Systems

The Analytical Solutions for Orthotropic Cantilever Beams （I）： Subjected to Surface Forces

Lateral Buckling of Web-Tapered I-beams: A New Theory

Analytical Solutions for Bending Curved Beams with Different Moduli in Tension and Compression

Analysis of Elastic Support Beam on Dynamic Load

The interactive - buckling analysis for H- section stright and tapered steel beams under pure bending

Nonlinear Bending of Shear Deformable Anisotropic Laminated Beams Resting on Two-Parameter Elastic Foundations Based on an Exact Bending Curvature Model

Numerical Analysis on Bending Deep Beams with Different Moduli in Tension and Compression

Bending and Fracture Properties of Small Scale Elastic Beams – A Nonlocal Analysis

Finite Element Analysis of Two-Layered Beam Resting on Elastic Supports

BENDING PROPERTIES OF RC BEAMS WITH EXPOSED TENSILE REINFORCEMENT

Characterization of electroelastic beams under biasing fields with applications in buckling analysis

Analysis of Thermal Post-Buckling of Heated Elastic Rods

LATERAL BUCKLING ANALYSIS OF THIN-WALLED CURVED BEAMS

A new Bernoulli-Euler beam model based on a simplified strain gradient elasticity theory and its applications

Bending Analysis of Functionally Graded Curved Beams with Different Properties in Tension and Compression

On Nonlocal Vertical and Horizontal Bending of a Micro-Beam

Buckling analysis of thin-walled rectangular cantilever beam with elastic rotational constraint

Modal analysis of Euler beam based on Lagrangian bond graph