Abstract:The vertical and horizontal bending of micro-beams subjected to axial compressive and transverse concentrated loadings is a common lateral deformation in micro-/nano-engineering that plays a significant role in the design and optimization of micro-/nano-devices. The present study aims to investigate it using the nonlocal theory. For this purpose, the simplified mathematical model is developed, and the nonlocal differential constitutive equation is applied. Since the mechanical properties of micro-beams are different from those of macro-beams, the non-classical nonlocal bending moment is introduced to improve the classical bending formulation in order to adapt to the vertical and horizontal bending of micro-beams. The effects of the external load, external size, structural stiffness, and internal characteristic scale on the vertical and horizontal bending deformation including the midpoint deflection and critical compression are presented. The present analytical model and results are validated by the finite element method. It is shown that the critical compression decreases with increasing the internal characteristic scale. Moreover, the midpoint deflection varies remarkably with respect to the axial and transverse loadings, structural stiffness, internal characteristic scale, and external size. An obvious nonlocal scale effect is found, in which the internal characteristic scale cannot be neglected compared with the external size. Besides, a threshold value of the structural stiffness is determined, and the connotation of the nonlocal interaction requires that the structural stiffness shall not be lower than that threshold. A mutual restriction between structural stiffness and external loadings is observed in the vertical and horizontal bending. In particular, it is further proved that the classical continuum mechanics can not be used in micro-/nano-scaled mechanics through a strange phenomenon that is contrary to mechanical common sense in the calculation example. The study is expected to be beneficial to the design and application of micro-beams subjected to the vertical and horizontal bending.

Bending and Fracture Properties of Small Scale Elastic Beams – A Nonlocal Analysis

Effect of Scale Parameter on the Deflection of A Nonlocal Beam and Application to Energy Release Rate of A Crack

On Nonlocal Vertical and Horizontal Bending of a Micro-Beam

Comments on Nonlocal Effects in Nano-Cantilever Beams

Effect of boundary conditions and constitutive relations on the free vibration of nonlocal beams

Vibrational Responses of Micro/Nanoscale Beams: Size-Dependent Nonlocal Model Analysis and Comparisons

Nonlinear Non-Classical Microscale Beams: Static Bending, Postbuckling and Free Vibration

Deep Postbuckling and Nonlinear Bending Behaviors of Nanobeams with Nonlocal and Strain Gradient Effects

Structural analysis of nonlocal nanobeam via FEM using equivalent nonlocal differential model

New Criteria for Nanoscale Slender Beams and Thin Plates: Low Frequency Domain of Flexural Wave

Buckling of Nanobeams under Nonuniform Temperature Based on Nonlocal Thermoelasticity

Post-buckling analysis of functionally graded nanobeams incorporating nonlocal stress and microstructure-dependent strain gradient effects

A new Bernoulli-Euler beam model based on a simplified strain gradient elasticity theory and its applications

Nonlinear Free Vibration of Nanobeams Based on Nonlocal Strain Gradient Theory with the Consideration of Thickness-Dependent Size Effect

Thermal vibration analysis of cracked nanobeams submerged in elastic foundations by nonlocal continuum mechanics

Nonlinear Fracture Mechanics Analysis of Nano-Scale Piezoelectric Double Cantilever Beam Specimens with Surface Effect

Size-dependent Postbuckling for Microbeams: Analytical Solutions Using a Reformulated Strain Gradient Elasticity Theory

Elastic buckling and free vibration of nonlocal strain gradient Euler‐Bernoulli beams using Laplace transform

Nonlinear bending and post-buckling of extensible microscale beams based on modified couple stress theory

An Operational Calculus-Based Approach to a General Bending Theory of Nonlocal Elastic Beams

Dynamic Properties of Flexural Beams Using A Nonlocal Elasticity Model