Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to study the influence of friction coefficient on the stiffness of disc spring, A series of disc springs (D = 71 mm) were selected in this paper. The tension and compression experiments of disc spring components were carried out by universal testing machine. The load-displacement characteristic curves of disc springs with different friction surfaces were obtained. The results show that in the loading process, the friction effect hinders the increase of the deformation of the disc spring, so that the actual stiffness of the disc spring is improved and the actual compensation amount is reduced, so this result is worthy of attention. In order to further study the influence of friction coefficient on the loading process of disc spring, according to the load-deformation formula of disc spring in A-L method, the tangential stress caused by friction is added, and the stiffness calculation model of corresponding disc spring is established by Workbench finite element software. The coefficients of different friction surfaces are used as variables for numerical calculation. The results show that the theoretical calculation, numerical calculation and experimental results of stiffness increase with the increase of friction coefficient under 0.55h (the compensation displacement of A71 disc spring under the working displacement of corrugated tube ±10 mm). Among them, the numerical calculation results are close to the experimental results, and the error value is less than 1%. The numerical calculation results are corrected by using the experimental data, and the corrected model calculation results are in good agreement with the measured results.

Research on Contact Deformation Experiments in Stiffness Measurement of Spring Tubes

Research on Stiffness Measurement of Spring Tubes Based on Three-Dimensional Conformal Contacts Model

Study on stiffness measurement of spring tube based on Hertzian contact theory

Research on Stiffness Precise Measurement of Spring Tubes

Improvement and Error Analysis of Spring Tube Stiffness Measurement

Research on Transformation of Stiffness Measurement Mode of Spring-Tube of Electro-Hydraulic Servo Valve

Finite element analysis and experimental study of spiral flexure spring

Transformation of Force-Linear Displacement and Moment-Angular Displacement on Different Measurement of Spring-Tubes Stiffness

Research on stiffness measurement of spring tubes and key technology

A Method of Constitutive Experiment for Accurate Description of Tube Performance under Rotary-Draw Bending

Analyze of Clamp Rod on Spring Tube Stiffness Measurement

Influence of fractal-based contact friction coefficient on the stiffness of disc springs: Experimental and numerical studies

Experimental and Numerical Analysis of Spring Stiffness on Flow and Valve Core Movement in Pilot Control Globe Valve

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Bending deformation behavior and characterization method of flexural stiffness of composite tubes under four-point bending tests

Formula of Cylindrical Spring Stiffness for Nonlinear Large Deformation and Its FEM Verification

A Full Range Experimental Study of Amplitude- and Frequency-Dependent Characteristics of Rubber Springs

Influence of coil contact on static behavior of helical compression springs

An Analytic Model for TC4 Titanium Alloy Tube Bending Springback Considering Temperature Effects

Finite Element Analysis on the Stiffness of Leaf Springs

Springback Investigation of a Thick-Walled Tube Under Combined Torsion-Bending and Internal Pressure by Using Continuum Damage Mechanics