Abstract:In order to analyze and predict the corrosion ratio and rust layer distribution of steel rebar embedded in reinforced concrete under time-varying climatic conditions, a self-balancing steel corrosion model was established by connecting the environmental temperature, humidity, external chloride ions and oxygen concentration to the potential distribution and current density of the steel using finite element method. The model covered the whole corrosion process of steel rebar in concrete under natural climate, including the steel rebar depassivation, steel corrosion propagation and the rust layer expansion on the surface of steel rebar. In the proposed model, the microcell and macrocell corrosion were coupled by electrochemical polarization, and the cathode-to-anode area ratio was determined by the time-varying chloride distribution at the rebar surface. Taking the diffusion of chloride ions and oxygen in concrete into account, the distribution of corrosion potential of reinforcement, the change of corrosion current density of reinforcement, and the distribution of rust layer on the surface of reinforcement can be obtained based on the variation of natural temperature and humidity. The proposed model was validated utilizing the experimental data from the literatures. On this basis, a discussion about the influence of long-term climatic environments on the corrosion kinetics were conducted. The results suggest that environmental temperature and relative humidity affect the steel corrosion process mainly by affactting the chloride and oxygen diffusion coefficients, concrete resistivity, and concentration of dissolved oxygen in concrete pore solution. The corrosion current density of steel in concrete is sensitively influenced by the environmental temperature more than relative humidity. Although the initial exposure time has a significant impact on the accumulation process of chloride on steel surface within one climatic cycle, it has little influence on the final chloride distribution at the end of the period. However, the initial exposure time remarkably influences the evolution profile of rust layer thickness during the climatic cycle. The steel rebar initially exposed to a higher temperature suffers from more severe corrosion than that initially exposed to a lower temperature.

Computer Simulation of Uniform Corrosion Process for Carbon Steel

Corrosion behavior and cellular automata simulation of carbon steel in salt-spray environment

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Three dimensional cellular automaton for simulation of the multi-pit corrosion damage evolution

Numerical Simulation and Prediction of Corrosion Behavior of Low-Carbon Steel Under Different Salt Spray Concentrations Based on Cellular Automata

A simulation approach for corrosion-fatigue behaviour of metallic structures considering coupling effect

Simulation of Pitting Corrosion Under Stress Based on Cellular Automata and Finite Element Method

A fully coupled model of hydrodynamic-chemical-electrochemical processes for CO2 uniform corrosion in multi-physics environment

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

Dynamic Electrochemical Model of Steel Corrosion in Concrete Microenvironment under Multifield Action of Heat-Moisture-Chlorine

Dynamic Simulation Method for Probability Evolution of Reinforcement Steel Corrosion

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Contribution of cellular automata to the understanding of corrosion phenomena

Simulation Investigation on Environment-Induced Pitting Corrosion on the Metal Surface

Comparison of Uniform and Non-Uniform Corrosion Induced Damage in Reinforced Concrete Based on a Gaussian Description of the Corrosion Layer

A Method for Predicting the Corrosion Behavior of Structural Steel under Atmosphere

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

Numerical simulation of electrochemical mechanism of steel rebar corrosion in concrete under natural climate with time-varying temperature and humidity

Non-Uniform Distribution of A Corrosion Layer at A Steel/Concrete Interface Described by A Gaussian Model