Abstract:The main part of oil‐immersed power equipment is oil‐paper insulation. At lower ambient temperatures, transformer oil will become viscous. As a result, compared to those at room temperature or operating temperature, the frequency domain dielectric properties of oil‐paper insulation at low temperatures are drastically different. For evaluating the insulation condition of electrical equipment, it is essential to accurately determine their dielectric properties. This paper described the FDS test, the DC conductivity test, and the transformer oil viscosity test, which was carried out in a laboratory environment for different ageing of oil‐immersed pressboard and transformer oil at 233–373 K. The effects of temperature on the dielectric properties at the competing mechanisms of polarisation and conductivity loss were clarified based on variations of the FDS curves. Considering the viscosity change of ageing transformer oil at low temperatures, the Arrhenius and VFT viscosity equations were used to achieve a fitting calculation in the different temperature zones. Based on the molecular/ion transition model in the force field and electric field, the characterisation relationships between the dynamic viscosity, DC conductivity, and test temperature of transformer oil were established. The limitations of conventional transformer oil equivalent dielectric relaxation models over a wide temperature range were finally clarified by combining the test findings of the DC conductivity over a wide temperature range with observed and simulated calculations. This paper provides an essential theoretical reference when using the FDS test to diagnose the insulation performance of oil‐immersed power equipment in extremely cold regions.

Effect of temperature on oil-gas separation in membrane separation based transformer on-line monitoring

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Energy-efficient separation alternatives: metal-organic frameworks and membranes for hydrocarbon separation.

Process optimization of CO2membrane and cryogenic hybrid separation

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

Development of an Online Detection Setup for Dissolved Gas in Transformer Insulating Oil

Design for separation efficiency test stand of oil separator used in compressors

Oil-Gas-Water Three-Phase Flow Measurement Based on the Theory of Partial Separation

Research Progress of Membrane Contactor for Gas Separation

Simulation research on the flow field performance of the supersonic separator for natural gas

Analysis on Selecting Online Monitoring Devices of Dissolved Gases in Transformer Oil in Severe Cold Region

Thermofluidic investigations of oil natural transformer: Closed‐loop modelling and experimental validation

Research on the variation of dielectric properties of oil‐paper insulation for power equipment over a wide temperature range

Quantitative Analysis of FTIR Used in Transformer On-line Monitoring

Development of the Separation Column's Temperature Field Monitoring System

Influences of Temperature on Space Charge in Gas-to-Liquid Oil-Impregnated Paper

Thermodynamic Computation Method of Thermal Decomposition Gas Content in Transformer Oil Considering Temperature and Competitive Reaction

Development and application of domestic on-line Fourier infrared gas analyzer

Thermal field modeling and characteristic analysis based on oil immersed transformer

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator

[Determination of partition coefficient of dissolved gases in transformer oil using phase ratio variation method and static headspace gas chromatography]