Abstract:Polypropylene hollow fiber membrane (PPHFM) contactor, with aqueous solution absorbent such as sodium hydroxide (NaOH), monoethanolamine (MEA) and diethanolamine (DEA), was designed and used to separate and fix CO2 from CO2/N2 gas mixtures. The factors that influence the separation properties of CO2/N2 were investigated. It was found that the CO2 removal efficiency is the best by using MEA solution as absorbent. The overall mass transfer coefficient (K) increases with the increase of liquid flow, gas flow and the concentration of the absorbent; however, it decreases with the carbon dioxide concentration in the gas mixture and the temperature of the absorbent solution. Preliminary results showed that carbon dioxide can be fixed efficiently into sodium carbonate and/or sodium bicarbonate with NaOH as the absorbent in the membrane contactor. Pure carbon dioxide, on the other hand, can be produced when MEA or DEA was used as the absorbent. INTRODUCTION Membrane separation of gases has emerged into an important unit operations technique offering specific advantages over more conventional separation procedures (e.g. cryogenic distillation and adsorption). One can envisage that these technologies will also make great contribution to the growth of new research area, such as carbon dioxide capture from flue gas. However, even through there are a large number of potential applications for gas separation with polymer membranes, only relatively few of them have become applied in practice. The potential application of a polymer as a separation membrane depends upon the possible throughput and the purity of product. This means that both the permeability coefficient for the gas that is transported more rapidly and the selectivity should be as large as possible. However, it was found that simple structural modifications, which lead to increases in polymer permeability usually, cause losses in permselectivity and vice versa. This so-called ′′trade-off′′ relationship is well described in the literature. It is thus possible to find polymers that exhibit high selectivity and low permeability and vice versa, in addition to that combine low selectivity with low permeability. There do not appear to be any polymers that show the desired trend to large values for both permeability and selectivity. Therefore, new membrane materials and technologies should be exploited to accommodate new applications, such as the simultaneous separation and capture of carbon dioxide from flue gas. TECHNOLOGY Membrane contactors are devices that achieve gas/liquid or liquid/liquid mass transfer without dispersed one phase within another. As schematically represented in Figure 1, they are accomplished by passing the fluid on opposite side of a microporous membrane or a composite membrane (e.g. microporous membrane coated with PDMS rubber). The porous membrane acts as a non-selective barrier between both phases. Separation is determined by the reaction of one component in the gas mixture with the absorbent in the liquid. Figure 1. Schematic rep This approach offers a numb contactor for gas sorption, such m), no flooding and foaming p low energy consumption and eas composite membranes, the main turn, low energy consumption), with absorbent variation. A sim listed in Table 1. P

Research Progress of Membrane Contactor for Gas Separation

Novel Membrane Contactors Used in Waste Gas/Liquid Separation

Research Progress in Gas Separation Using Hollow Fiber Membrane Contactors

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Progress in Application of Immobilized Ionic Liquid for Gas Separation

Research Progress in Removal of CO2 from Closed Spaces by Membrane Technology

Energy-efficient separation alternatives: metal-organic frameworks and membranes for hydrocarbon separation.

Research Progress of Separation Mechanism and the Affecting Factors of Pervaporation Through Zeolite Membrane

Analysis on the structure of different hollow fiber membrane contactors

On the research and application trends of global gas membrane separation technology --Based on analysis of SCI articles and patents in recent 20 years

Recent advances of the interfacial polymerization process in gas separation membranes fabrication

Membrane Gas Separation: A Review/State of the Art

Hollow fiber gas-liquid membrane contactors for acid gas capture: a review

A Review on the Morphology and Material Properties of the Gas Separation Membrane: Molecular Simulation

Research Progress of CO2 Recovery and Capture by Membrane Technology

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Control Method of Feed Gas Flux in Membrane Separation Process

Applications of Polyacetylene Derivatives in Gas and Liquid Separation

Challenges and recent advances in MOF-based gas separation membranes

Current status and advances in membrane technology for carbon capture

Separation and Fixation of Carbon Dioxide Using Polymeric Membrane Contactor