Abstract:Polypropylene hollow fiber membrane (PPHFM) contactor, with aqueous solution absorbent such as sodium hydroxide (NaOH), monoethanolamine (MEA) and diethanolamine (DEA), was designed and used to separate and fix CO2 from CO2/N2 gas mixtures. The factors that influence the separation properties of CO2/N2 were investigated. It was found that the CO2 removal efficiency is the best by using MEA solution as absorbent. The overall mass transfer coefficient (K) increases with the increase of liquid flow, gas flow and the concentration of the absorbent; however, it decreases with the carbon dioxide concentration in the gas mixture and the temperature of the absorbent solution. Preliminary results showed that carbon dioxide can be fixed efficiently into sodium carbonate and/or sodium bicarbonate with NaOH as the absorbent in the membrane contactor. Pure carbon dioxide, on the other hand, can be produced when MEA or DEA was used as the absorbent. INTRODUCTION Membrane separation of gases has emerged into an important unit operations technique offering specific advantages over more conventional separation procedures (e.g. cryogenic distillation and adsorption). One can envisage that these technologies will also make great contribution to the growth of new research area, such as carbon dioxide capture from flue gas. However, even through there are a large number of potential applications for gas separation with polymer membranes, only relatively few of them have become applied in practice. The potential application of a polymer as a separation membrane depends upon the possible throughput and the purity of product. This means that both the permeability coefficient for the gas that is transported more rapidly and the selectivity should be as large as possible. However, it was found that simple structural modifications, which lead to increases in polymer permeability usually, cause losses in permselectivity and vice versa. This so-called ′′trade-off′′ relationship is well described in the literature. It is thus possible to find polymers that exhibit high selectivity and low permeability and vice versa, in addition to that combine low selectivity with low permeability. There do not appear to be any polymers that show the desired trend to large values for both permeability and selectivity. Therefore, new membrane materials and technologies should be exploited to accommodate new applications, such as the simultaneous separation and capture of carbon dioxide from flue gas. TECHNOLOGY Membrane contactors are devices that achieve gas/liquid or liquid/liquid mass transfer without dispersed one phase within another. As schematically represented in Figure 1, they are accomplished by passing the fluid on opposite side of a microporous membrane or a composite membrane (e.g. microporous membrane coated with PDMS rubber). The porous membrane acts as a non-selective barrier between both phases. Separation is determined by the reaction of one component in the gas mixture with the absorbent in the liquid. Figure 1. Schematic rep This approach offers a numb contactor for gas sorption, such m), no flooding and foaming p low energy consumption and eas composite membranes, the main turn, low energy consumption), with absorbent variation. A sim listed in Table 1. P

Research Progress in Gas Separation Using Hollow Fiber Membrane Contactors

Research Progress of Membrane Contactor for Gas Separation

Novel Membrane Contactors Used in Waste Gas/Liquid Separation

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Progress in Application of Immobilized Ionic Liquid for Gas Separation

Research Progress in Removal of CO2 from Closed Spaces by Membrane Technology

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Analysis on the structure of different hollow fiber membrane contactors

A review of recent advances in carbon dioxide absorption–stripping by employing a gas–liquid hollow fiber polymeric membrane contactor

Hollow fiber gas-liquid membrane contactors for acid gas capture: a review

Progress of Separation of Carbon Dioxide from Gas Mixture by Gas Separation Membrane

A Critical Review in Recent Progress of Hollow Fiber Membrane Contactors for Efficient CO2 Separations.

HOLLOW FIBER MEMBRANE CONTACTOR ABSORPTION OF CO 2 FROM THE FLUE GAS : REVIEW AND PERSPECTIVE

Research progress in hollow fiber membranes for CO2 capture

Separation and Fixation of Carbon Dioxide Using Polymeric Membrane Contactor

Recent Advancements in Molecular Separation of Gases Using Microporous Membrane Systems: A Comprehensive Review on the Applied Liquid Absorbents

Ethanol-water Separation in Hollow Fiber Membrane Contactor

Recent advances of the interfacial polymerization process in gas separation membranes fabrication

Facilitated Transport Membranes With Ionic Liquids for CO2 Separations

Research Progress of CO2 Recovery and Capture by Membrane Technology

Theoretical Study on CO2 Absorption from Biogas by Membrane Contactors: Effect of Operating Parameters