Abstract:The airside heat, mass and momentum transfer characteristics of seven wavy fin-and-tube heat exchangers with hydrophilic coating under dehumidifying conditions were experimented. The test inlet air dry bulb temperatures were 20, 27 and 35oC, the inlet relative humidity were 50%, 60%, 70% and 80%, and the air velocity were 0.5, 1.0, 2.0, 3.0 and 4.0ms−1. The test results indicate that both the Colburn jm factor and the Colburn jh factor decrease with the increase of fin pitch, and this phenomenon becomes more and more pronounced as Reynolds number decreases. The friction factor is very sensitive to the change of fin pitch, and the friction factor shows a cross-over phenomenon as fin pitch changes. The Colburn jh factor decreases and the Colburn jm factor increases when the number of tube rows increases, while the friction performance is insensitive to the change of the number of tube rows. The effects of inlet relative humidity on the heat transfer and friction performance can be omitted, but the Colburn jm factor decreases with the increase of the inlet relative humidity. The predictive ability of the available state-of-the-art heat transfer and pressure drop correlations was evaluated with the experiment data of the present study. The new heat, mass and momentum transfer correlations were proposed to describe the present test results according to the multiple linear regression technique. The mean deviations of the proposed jh, jm and f correlations are 6.3%, 8.9% and 7.9%, respectively. Comparing to published data reduction method, the process line on psychrometric chart of fin-and-tube heat exchanger for partially wet conditions and more accurate overall heat transfer coefficient equation are put forward in this paper.

Air-side thermal hydraulic performance of an integrated fin and micro-channel heat exchanger

Numerical Study on Air-Side Performance of an Integrated Fin and Micro-Channel Heat Exchanger

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Air Side Performance of a Novel Lanced Fin and Flat Tube Heat Exchanger

Thermal-hydraulic Performance of Novel Louvered Fin Using Flat Tube Cross-Flow Heat Exchanger

Correlation of Flow and Heat Transfer Characteristics for Multi-louvered Fin

Test of flow and heat transfer characteristics for offset strip fin

Experimental Study on Heat Transfer and Pressure Drop Characteristics in a Microchannel Heat Exchanger Assembly with S-shaped Fins

Flow and Heat Transfer in Compact Offset Strip Fin Surfaces

Airside Heat Transfer and Friction Characteristics for Enhanced Fin-and-tube Heat Exchanger with Hydrophilic Coating under Wet Conditions

Heat Transfer and Pressure Drop Correlations for Compact Heat Exchangers with Multi-Region Louver Fins

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Airside characteristics of heat, mass transfer and pressure drop for heat exchangers of tube-in hydrophilic coating wavy fin under dehumidifying conditions

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Experimental Study of the Airside Performance for Interrupted Fin-and-tube Heat Exchanger with Hydrophilic Coating under Dehumidifying Conditions

A Comparative Study Of Fin-And-Tube Heat Exchangers With Various Fin Patterns

Airside Performances of Finned Eight-Tube Heat Exchangers

Research on Heat Transfer and Pressure Drop Characteristics of Air Side for Outdoor Wavy Fin-tube Heat Exchanger of Residential Air Conditioner

Thermal-hydraulic performance evaluation of airside of wavy fin compact heat exchangers under wet conditions