Thermal Conductivity of EP/GNs/MWCNTs Composites
Xia Yu,Jiao Jian,Cui Yonghong,Zhao Lizhen
DOI: https://doi.org/10.3969/j.issn.1001-3539.2016.08.002
2016-01-01
Abstract:Multi-walled carbon nanotubes (MWCNTs) and graphene nanosheets (GNs) were used as thermal conductivefiller, epoxy resin (EP) was used as matrix,the EP/GNs/MWCNTs composites were prepared by solvent and ultrasonic dispersion method,the thermal conductive property of which was comparedto EP/MWCNTs and EP/GNs composites. Transmission electron microscope were used to analyze the microstructure of the composites. Hot Disk thermal conductivity meter was used to measure the thermal conductivity of the composites. Differential scanning calorimetry and thermal gravimetric analyzer were used to analyze the heat resistance and thermal stability of the composites. The experimental results demonstrate that it’s easier to form thermal conductive network in composites using the mixedfillers MWCNTs and GNs than using one single kind. The thermal conductiv-ity,glass transition temperature (Tg) and thermal decomposition temperature of EP increase gradually as the content of MWCNTs or GNs increases. Among these,GNs is more beneficial to improve the thermal conductivity and thermal decomposition temperature, MWCNTs is more beneficial to improveTg. Under the same contents of thefillers,the composites with mixedfiller does better than the one with single kind offiller in improving heat-conductivity properties,and the thermal conductivity of the composites increase as the content of GNs in the mixing GNs/MWCNTsfillers increases. When the volume fraction of GNs and MWCNTs is 0.6% and 0.4% respectively,the thermal conductivity,Tg and initial thermal decomposition temperature of EP/GNs/MWCNTs composite is 0.565 W/(m·K),152℃ and 316℃ separately,which improves by 132.5%,34.5% and 8.2% compared with pure EP.