Abstract:Human society’s need to build low-weight, high-strength and durable structures has increased the demand for composite materials. In this case, composites are used where high mechanical strength, low weight, sound and thermal insulation properties are required. One of the most important issues now is designing materials and coatings aimed at reducing heat loss and resisting high temperatures. One way to address this problem is to develop a technique for preparing and applying composite materials that slow down their heating applied to a surface. In this study, carbon nanotubes (CNTs) reinforced composites were fabricated using silicone molding to be applied to honeycomb sandwich structures. To determine the effect of CNTs on the thermal behavior of the sandwich panels, different weight percentages of this material (0.025, 0.05. 0.075 wt.%) were added to the epoxy resin. The results showed that the thermal stability of the epoxy composites was directly related to the increase in the percentage of CNTs as the CNT content increased to 0.075 wt.%, and the thermal degradation temperature of the epoxy composites increased by 14 °C. In addition, the energy absorption increased by 4.6% with an increase in CNTs up to 0.075 wt.%. Density measurements showed that the density of the nanocomposite samples increased by adding CNTs to pure epoxy resin. The actual densities of the samples reinforced with 0.025, 0.05, and 0.075 wt.% CNTs are 0.925, 0.926, and 0.927 of the theoretical density, respectively. Since the CNT dispersion uniformity in the epoxy matrix can significantly affect the properties of the composites, in this study, a new method of dispersing CNTs in the epoxy resin matrix resulted in higher thermal conductivity while using lower amounts of CNTs compared to other studies. The storage modulus of the epoxy matrix composites reinforced with 0.05 wt.% in this study was 25.9% and 6.9% higher than that from the previous study reinforced with 0.1 wt.% and 0.25 wt.% CNTs, respectively. Furthermore, the tanδ and loss modulus of the composite reinforced with 0.05 wt.% CNTs in this study were 52% and 54.5% higher than that from the previous study with 0.1 wt.% CNTs, respectively. This study provided an optimal approach for designers and engineers who want to effectively design their composite honeycomb sandwich structure with better thermal properties.

Effects of Chemical Modifications on the Thermal Conductivity of Carbon Nanotube Composites

Carbon Nanotube-Based Super Nanotubes: Tunable Thermal Conductivity in Three Dimensions

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

Thermal Conductivity Improvement Of Silicone Elastomer With Carbon Nanotube Loading

Effects of Anisotropy, Aspect Ratio, and Nonstraightness of Carbon Nanotubes on Thermal Conductivity of Carbon Nanotube Composites

Thermal Properties of Carbon Nanotubes/Styrene-Butadiene Rubber Composites

Improving the Thermal Conductivity of Nanocomposites by Increasing the Length Efficiency of Loading Carbon Nanotubes

Effects of Carbon Nanotubes on Thermal Behavior of Epoxy Resin Composites

Interface Effect on Thermal Conductivity of Carbon Nanotube Composites

High-fidelity characterization on anisotropic thermal conductivity of carbon nanotube sheets and on their effects of thermal enhancement of nanocomposites

Review on Molecular Dynamics Simulations of Effects of Carbon Nanotubes (CNTs) on Electrical and Thermal Conductivities of CNT-Modified Polymeric Composites

Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites

Interaction between carbon nanotubes with functional groups and epoxy resin and its effect on thermal properties of carbon nanotubes/epoxy composites

Interface enhancement of carbon nanotube/mesocarbon microbead isotropic composites

Experimental study on preparation and properties of carbon nanotubes-, graphene –natural rubber composites

Modification of Thermal Conductivity of PMMA and PC by making their Nanocomposites with Carbon Nanotubes

Carbon Nanotube/Polymer Nanocomposites: Improved or Reduced Thermal Stabilities?

Tribological properties of carbon nanotube-doped carbon/carbon composites

Studies on Thermal Conductive Properties and Mechanism of a New ACNT/C Nanocomposite Material