Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Cmos-Compatible Thermal Compensator Based on A Modified Mach-Zender-Interferometer

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

New Designed Mach-Zehnder GaAs Traveling-wave Interferometer Modulators Based on the Analytical Numeral Results of the Method of Line

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Si Photonic Wire Waveguide Devices

Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

Optical Temperature Sensor Based on Polysilicon Waveguides

Broadband Athermal Waveguides and Resonators With Low Anomalous Dispersion

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

Design and Simulation of Temperature-Insensitive Arrayed Waveguide Gratings Based on Silicon Nanowires

Thermally Switchable/tunable Photonic Integrated Devices on Silicon

Ultra-Compact and Temperature-Insensitive Mach-Zehnder Interferometer Based on One Multimode Waveguide on Silicon

Temperature-insensitive Mach-Zehnder Interferometer Based on a Silicon Nitride Waveguide Platform.

High-efficiency Thermo-Optic Phase Shifter with Segment Heating Electrodes Based on High Index Contrast Silicon Oxide Waveguide

Athermal and Cmos-Compatible Flat-Topped Silicon Mach-Zehnder Filters