Abstract:In this paper, a method for ultrafast modulation of jet droplets trajectories is proposed to achieve finely patterned electrohydrodynamic jet printing by introducing jet‐deflecting electrodes around the jet, which can continuously transform the jet trajectory with lateral acceleration up to 104 m s−2. This extraordinary acceleration is two orders of magnitude higher than that can be achieved by using mechanical stage motion. Electrohydrodynamic jet (E‐Jet) printing is a highly promising non‐contact additive manufacturing technology. However, the fast jets generated by E‐Jet may cause droplet accumulation on small curvature features due to the slow motion control achieved by the mechanical stage, leading to a degradation of printed patterns in localized areas. Here, a method is proposed for ultrafast modulation of jet trajectories to achieve finely patterned E‐Jet printing by introducing jet‐deflecting electrodes around the jet, which can continuously transform the jet trajectory with lateral acceleration up to 104 ms−2. This extraordinary acceleration is two orders of magnitude higher than that can be achieved by using mechanical stage motion. Through a combination of numerical calculations and experiments, the effects of electric field parameters on the feature size and kinematic properties of jet droplets are investigated. In addition, deposition errors of <5 μm are fabricated by selecting appropriate working parameters and using UV‐curable adhesives as printing ink. Subsequently, complex micropatterns with feature curvatures <4 μm are successfully printed, demonstrating the consistency and reliability of this electrostatic deflection technique in achieving a uniform droplet deposition pitch. This innovative approach holds significant promise in the field of high‐quality microscale additive manufacturing.

Electrohydrodynamic deposition of polymeric droplets under low-frequency pulsation.

Electric Field-Assisted Droplet Formation Using Piezoactuation-Based Drop-On-Demand Inkjet Printing

Fine Droplet Generation Using Tunable Electrohydrodynamic Pulsation

The Effect of External Voltage on Pulsed Electrohydrodynamic Printing

Stresses dominate pulsated electrohydrodynamic spraying modes in near field.

High Frequency Pulsed Electrohydrodynamic Printing with Controllable Fine Droplets

Electrohydrodynamic Printing under Applied Pole-Type Nozzle Configuration

Oscillation Dynamics of Dielectric Polymer Droplets during Electrohydrodynamic Jetting in a Wide Range of Viscosities

Generation of Ultrafine Droplets in Femtoliter Scale from a Large Needle with Diameter of 200 Microns

Design and Experimental Testing of an Electric Field-Driven Droplet Injection Device

Controlling of Electrospray Deposition for Micropatterns

Pattern Deposition of Electrosprayed Polymer Nanoparticles

Droplet Motion Driven by Liquid Dielectrophoresis in the Low-Frequency Range

Coalescence and counterflow of droplets on needle electrode with negative corona discharge

Electric-field Triggered, On-Demand Formation of Sub-Femtoliter Droplets

Electric-field induced droplet vertical vibration and horizontal motion: Experiments and simulations

Simulation and Printing of Microdroplets Using Straight Electrode-Based Electrohydrodynamic Jet for Flexible Substrate

Ultrafast Droplets Trajectories Modulation of Electrohydrodynamic Jet Printing for Pattern Refinement Using Electrostatic Deflection

Hydrodynamic Dispensing and Electrical Manipulation of Attolitre Droplets

Saturated Surface Charging on Micro/Nanoporous Polytetrafluoroethylene for Droplet Manipulation

Electric-field Induced Droplet Stable Vertical Vibration: Experiments and Numerical Simulations