Abstract:High printing accuracy is one of the development directions of inkjet printing technology. To achieve a higher printing accuracy, nozzles with a small diameter and specific shape or surface properties are required. The diameter of these nozzles is usually less than 50 mu m, and the profile has developed from linear to streamline. Furthermore, the speed of the ink filling is improved by the hydrophilicity of the inner surface. Electrochemical machining (ECM) has the advantages of low surface roughness and fewer material limitations, and it is suitable for precision machining of microstructures. However, micro ECM is limited by the manufacture of tool electrodes; the electrode becomes more and more difficult to manufacture as the feature size decreased. To manufacture micro nozzles with a specific shape and hydrophilic surface, a hybrid electrochemical technique combining electrolysis and electroplating is proposed in this paper. Firstly an initial nozzle is electrolytically machined by a micro electrode with side wall insulation, then the direction of the electric field is reversed and the micro electrode is used as an auxiliary anode for electroplating. The profile of the nozzle is controlled by the different holding times and different feed depths of the auxiliary anode, and the surface properties arc determined by the choice of electrolyte. The profile of the streamlined micro nozzle is optimized by simulation analysis with COMSOL Multiphysics (R). A simulation model of the electroplating process is established, which verified the feasibility of diameter reduction and profile controlling of the nozzle. Experimental results show that a streamlined micro nozzle with an outlet diameter of 21 mu m is manufactured with the assistance of a micro electrode with diameter of 130 mu m. Furthermore, the feed depth of the micro electrode is optimized to improve the process efficiency of electroplating.

Electrohydrodynamic Printing under Applied Pole-Type Nozzle Configuration

Electric Field-Assisted Droplet Formation Using Piezoactuation-Based Drop-On-Demand Inkjet Printing

Design and Fabrication of A Piezoelectric Bend Mode Drop-On-Demand Inkjet Printhead with Interchangeable Nozzle

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

Flexible Patterned Electrohydrodynamic Jet Printing Using Orthogonal Deflection Electrodes

Self-Driven, Monopolar Electrohydrodynamic Printing via Dielectric Nanoparticle Layer

Numerical investigation of high-frequency pulsating electrohydrodynamic jet at low electric Bond numbers

Ultrafast Droplets Trajectories Modulation of Electrohydrodynamic Jet Printing for Pattern Refinement Using Electrostatic Deflection

Numerical analysis of electrohydrodynamic jet printing under constant and step change of electric voltages

Numerical modeling and analysis of coaxial electrohydrodynamic jet printing

Drop-on-demand (DOD) inkjet dynamics of printing viscoelastic conductive ink

Simulation and Printing of Microdroplets Using Straight Electrode-Based Electrohydrodynamic Jet for Flexible Substrate

Reduction Of Droplet Volume By Controlling Actuating Waveforms In Inkjet Printing For Micro-Pattern Formation

Drop-on-Demand Direct Printing of Colloidal Copper Nanoparticles by Electrohydrodynamic Atomization

Flexible conductive patterns using electrohydrodynamic jet printing method based on high-voltage electrostatic focusing lens

Fabrication of a Polymer Nano Nozzle for Electrohydrodynamic Small-Molecule Solvent Inkjet Printing

Charge Effects and Nanoparticle Pattern Formation in Electrohydrodynamic NanoDrip Printing of Colloids

Ink bridge control in the electrohydrodynamic printing with a coaxial nozzle

Direct Fabrication of Copper Nanoparticle Patterns through Electrohydrodynamic Printing in Cone-Jet Mode

Fabrication of optimized streamlined micro nozzles by hybrid electrochemical techniques

Effects of Nozzle and Fluid Properties on the Drop Formation Dynamics in a Drop-on-demand Inkjet Printing