Abstract:A water droplet impacting a solid surface is a natural universal phenomenon. The impact behavior of water droplets and their effect on the superhydrophobicity of anti-wetting surfaces are important for the practical application of anti-wetting materials. In this study, radio frequency plasma modification methods including oxygen plasma treatment (OPT) and octafluorocyclobutane (C4F8) plasma polymerization deposition (PPD) are used to fabricate superhydrophobic surfaces on polytetrafluoroethylene (PTFE) substrates. Micro / nanocone arrays with different heights and spacing distances and fluorocarbon films with a low surface energy are fabricated on superhydrophobic PTFE surfaces by OPT for 3, 10, and 20 min, and PPD for 1 min. The height and distance of the cone structure on the PTFE surfaces increase as the OPT duration increases. The transition from a nanocone to a microcone array is achieved on the PTFE surfaces when the OPT duration is increases to 10 min. Complete droplet rebound behavior is achieved on superhydrophobic PTFE surfaces with a micro / nanocone array. The water contact angle increases, and the rolling angle decreases on the superhydrophobic PTFE surfaces as the OPT duration increases. Superhydrophobic surfaces with microcones having a wide spacing distance and low array density preserve a low adhesive force on water droplets under static conditions. The contact time increases and the restitution coefficient decreases when the water droplet impactes the superhydrophobic surfaces with an increased OPT duration. Superhydrophobic PTFE surfaces with nanocones having a low spacing distance and high array density exhibit a low adhesive force to the water droplet during droplet impact. Changes in the wettability and impacting behaviors of the water droplets are investigated after water droplet impact by changing the number of impacting droplets. The contact electrification on the PTFE surfaces with micro / nanocone arrays at different heights and spacing distances is analyzed by measuring the accumulated potentials of the PTFE surfaces and accumulated charge quantity of the impacting droplets. The water contact angle decreases and the rolling angle on the PTFE surfaces increases as the number of impacting droplets increases up to nine. A water contact angle of lower than 150(degrees)and rolling angle of lower than 10(degrees)are observed on the PTFE surfaces with the micro / nanocone array after the water droplet impactes with droplet number nine. The contact time of the impacting water droplet increases and its restitution coefficient decreases as the number of impacting droplets increases. The accumulated potentials of the PTFE surfaces and charge quantity of the impacting droplets increase. The attractive force of the accumulated negative charges on the water droplets resultes in the damage of superhydrophobicity on the PTFE surfaces and a change in the water droplet impacting behaviors. The PTFE surfaces fabricated by OPT for 3 min and PPD for 1 min preserve the nanocones at a low spacing distance and high array density. The PTFE surfaces with nanocones having a high array density preserve the highly accumulated negative charges after the water droplet impact under the increased number of impacting droplets. The high surface potential causes a remarkable increase in the wettability of the PTFE surfaces as well as a change in the contact time and restitution coefficient of the impacting water droplets. The accumulated negative charge and surface potential of the PTFE surfaces with the microcones having a wide spacing distance and low array density by OPT for 20 min and PPD for 1 min are low after droplet impact under the increased number of impacting droplets. The influence of the droplets on the wettability of the PTFE surfaces and the changes in the contact time and restitution coefficient of the impacting water droplets are weakened. In conclusion, this study demonstrates the effect of contact electrification on the superhydrophobic stability of surfaces with different textures under water droplet impact.

Saturated Surface Charging on Micro/Nanoporous Polytetrafluoroethylene for Droplet Manipulation

Droplet-enabled controllable manipulation of tribo-charges from liquid-solid interface

Contactless acoustic tweezer for droplet manipulation on superhydrophobic surfaces

Fabrication of Micro/nano-Hierarchical Structures for Droplet Manipulation Via Velocity-Controlled Picosecond Laser Surface Texturing

Controllable Manipulation of Large-Volume Droplet on Non-Slippery Surfaces Based on Triboelectric Contactless Charge Injection

Surface charge printing for programmed droplet transport

Water Transport Control on A Patterned Superhydrophobic Surface Via Laser Direct Writing

Universal droplet propulsion by dynamic surface-charge wetting

Precise Droplet Manipulation Based on Surface Heterogeneity

Femtosecond laser patterned superhydrophobic surface with anisotropic sliding for droplet manipulation

Programmable Droplet Manipulation on Superhydrophobic Surfaces with Charge Gradient

Surface-Charge-Assisted Microdroplet Generation on a Superhydrophobic Surface

Optically Guided Pyroelectric Manipulation of Water Droplet on a Superhydrophobic Surface.

Light-induced manipulation of ultra-low surface tension droplets on stable quasi-liquid surfaces

Light control of droplets on photo-induced charged surfaces

Rapid construct superhydrophobic microcracks on the open-surface platform for droplet manipulations

Programmable Droplet Manipulation Enabled by Charged‐surface Pattern Reconfiguration

Triboelectric "Electrostatic Tweezers" for Manipulating Droplets on Lubricated Slippery Surfaces Prepared by Femtosecond Laser Processing

Effect of Contact Electrification During Water Droplet Impact on the Wettability of PTFE Surfaces Modified by Radio Frequency Plasma

Printing surface charge as a new paradigm to program droplet transport

Triboelectric Programmed Droplet Manipulation for Plug‐and‐Play Assembly