Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

Towards Understanding the Effects of Carbon and Nitrogen-Doped Carbon Coating on the Electrochemical Performance of Li4Ti5O12 in Lithium Ion Batteries: a Combined Experimental and Theoretical Study

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

A Comprehensive Study of Effects of Carbon Coating on Li[sub 4]ti[sub 5]o[sub 12] Anode Material for Lithium-Ion Batteries

Nanocomposites As Anode for Lithium-Ion Battery

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

Li4ti5o12-Coated Graphite Anode Materials for Lithium-Ion Batteries

Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Nitrogen, sulfur Co-doped porous graphene boosting Li4Ti5O12 anode performance for high-rate and long-life lithium ion batteries

Synthesis and Electrochemical Performance of Li4Ti5O12 Submicrospheres Coated with TiN As Anode Materials for Lithium-Ion Battery

Nano-structure and characterization of carbon composite with Al3+ and Mn4+ co-doped Li4Ti5O12 as anodes for Li-ion batteries

Highly Crystalline Lithium Titanium Oxide Sheets Coated with Nitrogen-Doped Carbon Enable High-Rate Lithium-Ion Batteries.

Nitrogen and sulfur co-doped carbon-coated Li4Ti5O12 composite to enhance lithium storage properties

Synthesis and electrochemical performance of nanoporous Li4Ti5O12 anode material for lithium-ion batteries

Li4Ti5O12 Coated by Biomass-Derived Carbon Quantum Dots as Anode Material with Enhanced Electrochemical Performance for Lithium-Ion Batteries

Advanced electrochemical performance of Li4Ti5O12-based materials for lithium-ion battery: Synergistic effect of doping and compositing

Electrochemical Performance Enhancement Of Nitrogen-Doped Tio2 For Lithium-Ion Batteries Investigated By A Film Electrode Model

Carbon-coated lithium titanate: effect of carbon precursor addition processes on the electrochemical performance

Electrochemical Performance Enhancement of Nitrogen-Doped TiO 2 for Lithium-Ion Batteries Investigated by a Film Electrode Model

Unveiling the Synergic Roles of Mg/Zr Co-Doping on Rate Capability and Cycling Stability of Li4Ti5O12