Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

Nitrogen and sulfur co-doped carbon-coated Li4Ti5O12 composite to enhance lithium storage properties

Nanocomposites As Anode for Lithium-Ion Battery

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Enhancing Ultrafast Lithium Ion Storage of Li4Ti5O12 by Tailored TiC/C Core/Shell Skeleton Plus Nitrogen Doping

Nano-structure and characterization of carbon composite with Al3+ and Mn4+ co-doped Li4Ti5O12 as anodes for Li-ion batteries

Advanced electrochemical performance of Li4Ti5O12-based materials for lithium-ion battery: Synergistic effect of doping and compositing

Highly Crystalline Lithium Titanium Oxide Sheets Coated with Nitrogen-Doped Carbon Enable High-Rate Lithium-Ion Batteries.

Ti 3+ Self-Doped Li 4 Ti 5 O 12 Anchored on N-Doped Carbon Nanofiber Arrays for Ultrafast Lithium-Ion Storage.

An Ultrathin and Continuous Li4Ti5O12 Coated Carbon Nanofiber Interlayer for High Rate Lithium Sulfur Battery

Crystalline/Non-Crystalline Carbon Co-Modified Strategy to Construct N, S Co-Doped Carbon Layer Wrapped Fe0.95S1.05/Carbon Nanotubes for Enhanced Lithium Storage Property

Scalable in Situ Synthesis of Li4Ti5O12/Carbon Nanohybrid with Supersmall Li4Ti5O12 Nanoparticles Homogeneously Embedded in Carbon Matrix

Nitrogen, sulfur Co-doped porous graphene boosting Li4Ti5O12 anode performance for high-rate and long-life lithium ion batteries

Raising Lithium Storage Performances of NaTi<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> by Nitrogen and Sulfur Dual-Doped Carbon Layer

Preparation of Carbon Nanotube Coated Li4Ti5O12 Nanosheets Heterostructure As Ultrastable Anodes for Lithium-Ion Batteries

Titania and Nitrogen-Doped Carbon Co-Modification: Their Synergic Effects on the Electrochemical Performance of LiFePO4

Double Carbon Modified CoS2/NiS2 As Anode Material for Efficient Lithium Storage Performance

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Nitrogen-sodium co-doping improves cycle performance of lithium titanate anode materials at high rate

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

High Rate Cycling Performance of Nanosized Li4Ti5O12/graphene Composites for Lithium Ion Batteries

Non-template Synthesis of Nitrogen-Doped Carbon-Coated CoS2 Nanoparticles for Enhanced Long-Term Lithium Storage