Abstract:Dimethyl ether (DME) is regarded as an environmentally benign fuel for vehicles. Two kinds of reactor technologies for DME synthesis have been proposed by previous researchers: the fixed-bed and the slurry reactor. As the reactions are highly exothermic and the temperature window of the catalyst is very narrow, the fixed-bed reactor provides a limited heat removal capability and a low conversion of the syngas. The slurry reactor can provide an effective temperature control but a very high inter-phase mass transfer resistance is added by the liquid medium. The Fluidized bed reactor can be an ideal reactor for DME synthesis as it possesses both high heat and mass transfer efficiencies. In this paper, a two-phase model is used to theoretically analyze the DME synthesis in a fluidized bed reactor, with both phases assumed to be in plug flow and taking into account the changes in bubble diameter resulting from the reaction. Three reactions take place simultaneously when DME is manufactured from the syngas (H2 + CO): a) CO+2H2 = CH3OH; b) 2CH3OH = DME+H2O; and c) CO+H2O = CO2+H2. The simulation shows that, at the reactor outlet, the equilibrium approaches of the three reactions are 0.32, 0.1, and 0.61, respectively. When H2/CO=1.0, the CO conversion and DME selectivity in a fluidized bed reactor are 62% and 95%, while those in a fixed-bed reactor are 9% and 86%. In a slurry reactor, the CO conversion and DME selectivity are 17% and 70%, respectively. Therefore, the fluidized-bed is the most promising candidate reactor for conducting the DME synthesis from syngas. Effects of the operating conditions on the performance of DME synthesis in the fluidized-bed reactor are discussed in details. The optimal H2/CO ratio is between 1.0-1.5, and increasing the pressure is shown to improve the reactor performance.

Effective Thermal Conductivity Coefficient of Fixed-Bed for Dimethyl Ether Direct Synthesis from Syngas

Effective thermal conductivity of catalyst for dimethyl ether direct synthesis from syngas

Effective Thermal Conductivity of Fixed Packing Bed of Cobalt-based Catalyst

Study on Effective Radial Thermal Conductivity of Gas Flow Through A Methanol Reactor

Dimethyl ether synthesis from syngas over bifunctional hybrid catalyst and the intrinsic kinetics

INTRINSIC KINETICS OF DIMETHYL ETHER SYNTHESIS FROM BIOMASS-SYNGAS IN A FIXED BED REACTOR

Study on Properties and Intrinsic Kinetics of Mixed and Hybrid Catalysts for Direct Dimethyl Ether Synthesis from Synthesis Gas Containing N2

Intrinsic Kinetics of Dimethyl Ether Synthesis from Syngas

DETERMINATION OF THE EFFECTIVE DIFFUSIVITIES OF ACTIVATED CARBON/METHANOL AND ACTIVATED CARBON/ETHANOL

Global Kinetics of Direct Synthesis of Dimethyl Ether from Syngas in Slurry Reactor over Cu-Zn-Al-Zr Catalyst

Effective thermal conductivity of sulfur-resisting methanation catalyst

Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas

Internal Diffusion Efficiency Factor of Bi-functional Catalyst for One-Step Dimethyl Ether Synthesis from Syngas

Measurement of Thermal Conductivity for Systems of Methyl Ethyl Ketoxime with Methyl Ethyl Ketone and N-Hexane Separately

Direct synthesis of dimethyl ether from syngas containing N2 in a slurry reactor in tandem with a fixed-bed reactor

Simulation and Experiment Study of Dimethyl Ether Synthesis from Syngas in A Fluidized-Bed Reactor

Thermal Conductivity of Gaseous Dimethyl Ether from (263 to 383) K

Effective Thermal Conductivity of Methane Hydrate-Bearing Sediments: Experiments and Correlations

Model of intrinsic kinetics of dimethyl ether directly synthesis from syngas containing N2 over mixed catalyst

Methanol Synthesis in a Three‐phase Catalytic Bed under Nonwetted Condition

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis