Abstract:Heat management poses severe constraints when designing non-adiabatic multi-tubular packed-bed reactors for strongly exothermic or endothermic catalytic processes. The exploitation of conduction in the solid matrix of engineered continuous internals (e.g., honeycomb monoliths, open-cell foams, periodic open-cell structures) as a heat transfer mechanism alternative, or possibly additional, to fluid-phase convection, is a promising strategy to relax some of these constraints, offering new opportunities for the intensification of catalytic reactors. Preliminary experimental data and modelling studies show that this is particularly true for compact-scale applications, when conductive internals are packed with catalyst micro-pellets. In this work, through pilot-scale testing, we show that overall heat transfer coefficients as high as 1300 W/m 2 /K can be achieved in periodic open-cell structures (POCS) made of a highly conductive aluminium alloy, 3D printed with an external continuous skin and packed with 300–400 μm catalyst micro-pellets. To this aim, a Fischer-Tropsch experimental campaign has been carried out in a pilot-scale rig, using an established 20 wt% Co/Al 2 O 3 catalyst formulation and a tubular reactor (28.80 mm I.D., 20 cm catalyst bed length) externally cooled with an isothermal diathermic oil. Thanks to the outstanding heat transfer properties of the packed-POCS reactor, by progressively increasing the oil temperature from 180 °C to 225 °C, once-through CO conversions as high as 70 % have been measured at gas hourly space velocities exceeding 4000 cm 3 (STP)/h/g cat , resulting in C 5 + yields in excess of 0.35 g/h/g cat , with a CH 4 selectivity always below 15 %. Such performances, made possible by the intensified heat management granted by the adopted reactor internals, are among the best ever reported for a compact-scale Fischer-Tropsch tubular reactor.

Effective Thermal Conductivity of Fixed Packing Bed of Cobalt-based Catalyst

Heat Transfer in a Fixed Bed of Cobalt-based Catalyst with Flowing Gas

Thermal Conductivity of Cobalt-Based Catalyst for Fischer–Tropsch Synthesis

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

Effective Thermal Conductivity Coefficient of Fixed-Bed for Dimethyl Ether Direct Synthesis from Syngas

Effective thermal conductivity of sulfur-resisting methanation catalyst

Cobalt-based Fischer-Tropsch synthesis: Effect of the catalyst granule thermal conductivity on the catalytic performance

Kinetics Studies of Cobalt Ft Catalyst Using High-Throughput Technology

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Synchrotron Radiation in Situ X-ray Absorption Fine Structure and in Situ X-ray Diffraction Analysis of a High-Performance Cobalt Catalyst Towards the Oxygen Reduction Reaction

CFD Study on Thermal Transport in Open-Cell Metal Foams with and Without a Washcoat: Effective Thermal Conductivity and Gas-Solid Interfacial Heat Transfer

Numerical Determination of Fluid‐to‐particle Mass and Heat Transfer Coefficients in Packed Bed Reactors

Study on Thermal Condu ctivity for Sulfur-Tolerant Methan ation Catalyst

A Study of the Heat Transfer Characteristics of Novel Ni‐foam Structured Catalysts

Heat transfer intensification in compact tubular reactors with cellular internals: A pilot-scale assessment of highly conductive packed-POCS with skin applied to the Fischer-Tropsch synthesis

Heat transfer characteristics of petroleum coke particle packed bed: An experimental and CFD simulation study

A DEM-based Heat Transfer Model for the Evaluation of Effective Thermal Conductivity of Packed Beds Filled with Stagnant Fluid: Thermal Contact Theory and Numerical Simulation

Effect of Heat Treatment Temperature on the Pt3Co Binary Metal Catalysts for Oxygen Reduced Reaction and DFT Calculations

Mathematic Simulation of a Tube-Shell Type Fixed-Bed Reactor for Fischer-Tropsch Synthesis

Intensification of High-Flux Fischer-Tropsch Synthesis with Axial Gradient Co-loading FeCrAl Monolith Catalysts

Effect of capillary condensation on effective diffusivity of gases in porous pellet