Abstract:Syngas production by the partial oxidation reforming of methane is a promising technology with a simple setup and quick dynamic response, which has great potential for application in small-scale fuel cells and portable power units. In this study, a catalytically enhanced porous media combustor for partial oxidation reforming is designed and tested. In the combustor, fuel-rich combustion in porous media and catalytic partial oxidation are integrated, benefitting from the merits of both technologies. Without external heat source, the combustor is directly ignited with a stoichiometric gas mixture during the cold startup process, and then adjusted to the partial oxidation conditions. Three zones, a preheating zone, an oxidation zone involving exothermic reactions, and a reforming zone involving endothermic reactions, are observed, which significantly affect the temperature profile in the axial direction. Considering both the methane conversion and reforming efficiency, the optimal equivalence ratio range for self-sustained operation is found to be 2.0-2.4. At an equivalence ratio of 2.0, the effect of the gas velocity on the temperature profile and gas composition of products are studied experimentally. At an equivalence ratio of 2.4 and a gas velocity of 0.13 m/s, the reforming efficiencies of the reactor reach 61.5% and 64.8% when 0.5 wt% Pd and 0.5 wt% Rh, respectively, are introduced to the second layer of the porous media. The carbon deposition at different axial positions of the reactor is analyzed, and the results indicate that carbon deposition by methane pyrolysis in the high-temperature oxidation zone is the dominating cause of carbon deposition. A re-ignition process at stoichiometric condition is helpful for the elimination of carbon.

Pilot study on the use of methane steam reforming catalyst in molten carbonate fuel cell

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Direct carbon dioxide-methane solid oxide fuel cells combined with in-situ exsolution perovskite La0.75Sr0.25Cr0.5Fe0.4Cu0.1O3-δ-based dry reforming catalysts

Performance and Long-Term Durability of Direct-Methane Flat-Tube Solid Oxide Fuel Cells with Symmetric Double-Sided Cathodes

The Feasibility Study of Using Methane As the Fuel for the Proton Exchange Membrane Fuel Cells under the Ambient Temperature

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Synergic effect investigation of carbon monoxide and other compositions on the high temperature proton exchange membrane fuel cell

Efficient conversion of low-concentration coal mine methane by solid oxide fuel cell with in-situ formed nanocomposite catalyst

Electrochemical Characteristics and Carbon Tolerance of Solid Oxide Fuel Cells with Direct Internal Dry Reforming of Methane

Experimental and Modeling Study of High Performance Direct Carbon Solid Oxide Fuel Cell with in Situ Catalytic Steam-Carbon Gasification Reaction

Applying high efficiency internal reforming catalyst for direct low concentration coal mine methane solid oxide fuel cells

Enhance coking tolerance of high-performance direct carbon dioxide-methane solid oxide fuel cells with an additional internal reforming catalyst

Selective electrochemical methanation of carbon dioxide using a sulphide derived CuZn catalyst

A Liquid–Vapor Two-Phase Model of Direct Methanol Fuel Cells With Platinum Group Metal-Free Cathode Catalyst

Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell

Simulation of Internal Manifold-Type Molten Carbonate Fuel Cells (MCFCs) with Different Operating Conditions

Mechanistic insight into catalytic conversion of methane on a Sr2Fe1.5Mo0.5O6−δ perovskite anode: a combined EIS-DRT, DFT and TPSR investigation

Hydrogen Production from Cylindrical Methanol Steam Reforming Microreactor with Porous Cu-Al Fiber Sintered Felt

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Performance and durability of a layered proton conducting solid oxide fuel cell fueled by the dry reforming of methane