Abstract:In order to investigate the tensile deformation behavior of ultra-high-strength-steel BR1500HS, a series of isothermal tensile experiments were carried out in a temperature range of 1023 similar to 1123 K and a strain rate range of 0.01 similar to 10 s(-1) on a Gleeble-3500 thermo-mechanical simulator. The results indicate that the flow stress initially increases to a peak value and then decreases gradually to a steady state. Based on the analysis of the effect of strain, temperature and strain rate on flow stress, dynamic recrystallization (DRX) type softening characteristics of the stress-strain curve with single peak were identified. The flow stress level decreases with increasing temperature and decreasing strain rate. By regression analysis for Arrhenius type equation, the hot deformation activation energy Q and material constants (n, alpha, beta and A) were calculated. Further, the Arrhenius-type constitutive equation of flow stress was developed by considering the effect of strain on the variable coefficients (including activation energy Q, material constants n, alpha, and A). The validity of the developed constitutive equation incorporating the influence of strain was evaluated through comparing the experimental and predicted data. Furthermore, the predictability of the developed model was also evaluated using two standard statistical parameters, correlation coefficient (R) and average absolute relative error (AARE). And R-value and AARE-value for the model are 0.997 and 4.06% respectively, which indicates that the developed model can precisely estimate the flow behavior for BR1500HS alloy throughout the entire temperature and strain rate range.

Dynamic Mechanical Properties and Constitutive Relationship of Hardened Steel (45HRC) under High Temperature and High Strain Rate

Dynamic tests and constitutive model for 7075-T6 aluminum alloy

Dynamic Mechanical Behavior and Constitutive Model of Stainless Steel

Dynamic recrystallization kinetics model of hardened GCr15 steelat high temperature and high strain rate

Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures

Plastic Behavior and Constitutive Relations of DH-36 Steel over a Wide Spectrum of Strain Rates and Temperatures under Tension

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

The Dynamic Mechanics Performance And Constitutive Model Of 30crmnsia High Strength Alloy Steel

Study on Constitutive Equation of Hot Deformation of 15CrMoR Steel

Mechanical Behavior of a Stainless Steel Material at Elevated Temperatures and High Strain Rates

Dynamic Mechanical Properties and Constitutive Model of Fe-36Ni Invar Alloy at High Temperature and High Strain Rate

Comparative Study on Several Constitutive Models of GCr15 Steel at High Strain Rates

A Study on the Flow Behavior of 42crmo Steel under Hot Compression by Thermal Physical Simulations

Constitutive Modeling for Elevated Temperature Flow Behavior of 42crmo Steel

Constitutive Modeling for Tensile Behaviors of Ultra-High-Strength-Steel Br1500hs at Different Temperatures and Strain Rates

Experimental study of dynamic properties of 30CrMnSiA steel at high temperature

Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel

Constitutive Analysis on Thermal-Mechanical Properties of WHT1300HF High Strength Steel

Strain Modified Constitutive Equation and Processing Maps of High Quality 20mncr5(sh) Gear Steel

Dynamic Hardening Behavior and Ductile Fracture of High-Strength Steel at Intermediate Strain Rates