Abstract:High-temperature plastic flow is the underlying process that governs the product quality in many advanced metal manufacturing technologies, such as extrusion, rolling, and welding. Data and models on the high-temperature flow behavior are generally desired in the design of these manufacturing processes. In this paper, quantitative constitutive analysis is carried out on 3Cr-1Si-1Ni ultra-high strength steel, which sheds light on the mathematic relation between the flow stress and the thermal-mechanical state variables, such as temperature, plastic strain, and strain rate. Particularly, the hyperbolic-sine equation in combination with the Zener-Hollomon parameter is shown to be successful in representing the effect of temperature and strain rate on the flow stress of the 3Cr-1Si-1Ni steel. It is found that the flow stress of the 3Cr-1Si-1Ni steel is significantly influenced by strain. The strain-dependence on flow stress is not identical at different temperatures and strain rates. In the constitutive model, the influence of strain in the constitutive analysis is successfully implemented by introducing strain-dependent constants for the constitutive equations. Fifth-order polynomial equations are employed to fit the strain-dependence of the constitutive constant. The proposed constitutive equations which considers the compensation of strain is found to accurately predict flow stress of the 3Cr-1Si-1Ni steel at the temperatures ranging from 800 °C to 1250 °C, strain rate ranging from 0.01/s to 10/s, and strain ranging from 0.05 to 0.6.

Experimental study of dynamic properties of 30CrMnSiA steel at high temperature

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Dynamic tensile behavior of 5CrMnMo at elevated temperatures

Experimental Study on the Dynamic Tensile Behavior of A Poly-Crystal Pure Titanium at Elevated Temperatures

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Thermo-mechanical Properties of Ultra High Strength Steel 22simn2tib at Elevated Temperature

Dynamic Mechanical Behavior and Constitutive Model of Stainless Steel

Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30cr2ni4mov Steel Based on Flow Curves

A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures

Experimental microstructure evolution and cutting simulation for dynamic mechanical behaviors of 18CrNiMo7-6 steel considering heat treatment conditions

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

Experimental studies on the dynamic tensile behavior of Ti–6Al–2Sn–2Zr–3Mo–1Cr–2Nb–Si alloy with Widmanstatten microstructure at elevated temperatures

Thermal Flow Stress Constitutive Equation of Cr9Mo High-alloy Steel

An Experimental Study of the Strain Rate and Temperature Effects on the Mechanical Properties of 5Crmnmo

Cyclic Softening Properties of 30cr2mov Steel at Elevated Temperatures

Experimental investigation on mechanical behaviours of TMCP high strength steel

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Study on the high temperature tensile properties of steel alloy H13

Constitutive Modeling for Elevated Temperature Flow Behavior of 30cr2ni4mov Ultra-super-crical Rotor Steel

Dynamic strain aging and serrated flow behavior of Cr-Ti-B low carbon steel during warm deformation

Deformation Behavior and Constitutive Equation of 42CrMo Steel at High Temperature