Abstract:This study investigates a Nickel-based single crystal (SX) superalloy with femtosecond laser-drilled film-cooling holes (FCHs) under varying temperatures (room temperature, 850°C, and 980°C), employing a novel framework for predicting fatigue life based on initial manufacturing damage quantification. For all tested anisotropic SX superalloy specimens (including smooth and FCH specimens), the initial damage state is characterized as an equivalent initial flaw size (EIFS), and an EIFS calculation model considering stress concentration is established. Subsequently, the fatigue crack paths and microstructural characteristics of the FCH specimens at different temperatures are analyzed, elucidating crack initiation mechanisms and propagation patterns. A novel incremental plasticity J-integral driving force for fatigue crack propagation is introduced. By incorporating the closure effect of small crack propagation and employing Markov Chain Monte Carlo simulations for determining crack growth rate probabilities, a more accurate expression for the crack growth rate in relation to Δ J fat − Δ J th is derived. This expression comprehensively captures crack patterns on crystallographic planes and Type I mixed mode behavior. Finally, the total fatigue life of the FCH structures, featuring a threefold dispersion zone in both room and high-temperature environments, is predicted through experimental observations and description of crack growth rates. The predicted outcomes significantly outperform those of the conventional life prediction models reliant on crystal plasticity theory.

Thermal fatigue life of Glidcop Al-15 high-heat-load components

Fatigue Life Prediction Strategies for High-Heat-Load Components

Thermal Conductivity Measurement of GlidCop(R)in a Half-life Low-cycle Fatigue State

Mechanical and low-cycle fatigue behaviors of dispersion strengthened copper GlidCop

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Effect of Initial Overload on the Low Cycle Fatigue Life of Gh4169 Alloy at Different Temperatures

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Effects of Design Parameter Changes on the Fatigue Life of Light-Blocked Component

A Mini-Review on the Thermal Fatigue Properties of Copper Materials Applied at the Front-End of Synchrotron Radiation Facilities

Fatigue Life Prediction of Film-cooling Hole Specimens with Initial Damage

Structure design and thermal stress analysis of photo shutter on SSRF front end

The EIFS-based fatigue life prediction approach of nickel-based single crystals with film cooling holes at elevated temperature

Combined high and low cycle fatigue analysis of FGH96 alloy under high temperature conditions

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Assessment of Thermo-Mechanical Fatigue in a Nickel-Based Single-Crystal Superalloy CMSX-4 Accounting for Temperature Gradient Effects

Experiment and numerical simulation study of thermal fatigue of an aluminum alloy piston

Crack initiation mechanisms and life prediction of GH4169 superalloy in the high cycle and very high cycle fatigue regime

Study on Creep Fatigue of Heat Sink in W/RAFM Divertor for CFETR

Thermal Gradient Mechanical Fatigue Assessment of a Nickel-Based Superalloy

An Experimental Study for Low-Cycle Fatigue Crack Propagation of Glidcop Al-15

High-temperature Fatigue Crack Propagation Study of Superalloy GH4169 by Single-Lens 3D Digital Image Correlation